Wellbore Stability in Shale Formation Using Analytical and Numerical Simulation
نویسندگان
چکیده مقاله:
Optimization of drilling fluid parameters such as mud weight, salt concentration, and temperature is essential to alleviate instability problems during drilling through shale sections. The selection of suitable mud parameters can benefit from analyses that consider significant instability processes involved in shale-drilling–fluid interactions. This paper describes the development of analytical and numerical method for describing shale deformation. Appropriate and optimum mud pressure in which the highest consistency happens is calculated with analytical and numerical methods. It was found that, the predicted mud pressures obtained from two methods are approximately equal. The stress condition is considered non-hydrostatic. From the analytical and extensive numerical simulation it was concluded that with applying any mud pressure the well shape changes from spherical to elliptical. As the selection of the optimum mud pressure is based on the less movement and maintaining the well shape constant.
منابع مشابه
wellbore stability in shale formation using analytical and numerical simulation
optimization of drilling fluid parameters such as mud weight, salt concentration, and temperature is essential to alleviate instability problems during drilling through shale sections. the selection of suitable mud parameters can benefit from analyses that consider significant instability processes involved in shale-drilling–fluid interactions. this paper describes the development of analytical...
متن کامل2D Numerical Simulation of Improving Wellbore Stability in Shale Using Nanoparticles Based Drilling Fluid
The past decade has seen increased focus on nanoparticle (NP) based drilling fluid to promote wellbore stability in shales. With the plugging of NP into shale pores, the fluid pressure transmission can be retarded and wellbore stability can be improved. For better understanding of the interaction between shale and NP based drilling fluid based on previous pressure transmission tests (PTTs) on A...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Real-time Wellbore Stability Analysis: An Observation from Cavings at Shale Shakers*
Drill cuttings are considered representative of the lithology being drilled in a wellbore. However, the fragments that are two to three times larger and/or having odd shapes compared to the regular cuttings are commonly understood as cavings from the wall of the borehole and they are seldom of any help in compilation of a lithology. In fact, cutting description manual recommends ignoring cuttin...
متن کاملChemical Effect on Wellbore Instability of Nahr Umr Shale
Wellbore instability is one of the major problems that hamper the drilling speed in Halfaya Oilfield. Comprehensive analysis of geological and engineering data indicates that Halfaya Oilfield features fractured shale in the Nahr Umr Formation. Complex accidents such as wellbore collapse and sticking emerged frequently in this formation. Tests and theoretical analysis revealed that wellbore inst...
متن کاملA Numerical Simulation Study on Wellbore Temperature Field of Water Injection in Highly Deviated Wells
According to the temperature distribution of water injection well-bore in highly deviated wells under different conditions and unstable temperature field heat conduction principles, a true three-dimensional model was established to analyze the law of variation on temperature of highly deviated wells during the water injection process, and to analyze the factors that influence the water injectio...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 47 شماره 1
صفحات 51- 60
تاریخ انتشار 2013-06-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023