Turbulent Flow over Cars

نویسنده

چکیده مقاله:

In this paper the flow behaviour over a number of car bodies is studied. For this purpose the unsteady 2-D incompressible Navier-Stokes equations have been applied. After averaging and nondimensionalizing the equations, the system of equations has been transformed from the Cartesian (x-y) coordinates to a body fitted generalized (-) coordinate. As the flow is incompressible, the density in the continuity equation will disappear and thus the coupling between the continuity and the momentum equations will be lost. To resume the missing coupling between the aforementioned equations an artificial state equation is introduced. This artificial state equation will couple the continuity and the momentum equations via pressure. For turbulence simulation Jones & Launders Low Reynolds turbulence model was employed. By means of an implicit method, the system of five equations are solved. From the flow field solution, the drag force on car geometries are predicted and the results are compared to the drag force calculated from experimental correlations. Agreement is fare enough i.e. within 90 percent of accuracy.  

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical simulation of nanofluid flow over diamond-shaped elements in tandem in laminar and turbulent flow

In this paper, the Al2O3-water nanofluid flow in laminar and turbulent flows inside tubes fitted with diamond-shaped turbulators is numerically modeled. The nanofluid flow is modeled by employing a two-phase mixture method and applying the constant heat flux boundary condition at tube walls. In the results, the effects of different parameters such as the geometry of turbulators, volume fraction...

متن کامل

Laminar and Turbulent Aero Heating Predictions over Blunt Body in Hypersonic Flow

In the present work, an engineering method is developed to predict laminar and turbulent heating-rate solutions for blunt reentry spacecraft at hypersonic conditions. The calculation of aerodynamic heating around blunt bodies requires alternative solution of inviscid flow field around the hypersonic bodies. In this paper, the procedure is of an inverse nature, that is, a shock wave is assumed a...

متن کامل

A Novel Similarity Solution of Turbulent Boundary Layer Flow over a Flat Plate

In this paper, the similarity solution of turbulent boundary layer flow on the flat plate with zero pressure gradients is presented. By employing similarity variables the governing partial differential equations are transformed to ordinary ones with inconsistent coefficients and solved numerically with the use of Runge–Kutta and shooting methods in conjunction with trial and error procedure. Fo...

متن کامل

Turbulent flow over a long flat plate with uniform roughness

For turbulent boundary-layer flow under a uniform freestream speed U∞ over a plate of length L, covered with uniform roughness of nominal sand-grain scale ks , the physical behaviors underlying two distinguished limits at large ReL ≡ U∞L/ν are explored: the fully rough wall flow where ks/L is fixed and the long-plate limit where Rek ≡ U∞ks/ν is fixed. For the fully rough limit it is shown that ...

متن کامل

Modeling turbulent flow over fractal trees with renormalized numerical simulation

High-Reynolds number flow over tree-like fractals is considered, with emphasis on the drag forces produced. Fractal objects display large scale-disparity and complexity while being amenable to a simple and standardized description. Hence, they offer an elegant idealization of the actual boundaries in practical applications where turbulence interacts with boundaries that are characterized by mul...

متن کامل

Direct numerical simulation of turbulent flow over a compliant surface

Direct numerical simulation of turbulent channel flow over a compliant surface has been performed to evaluate the friction drag reduction effect. It is found that a slight drag reduction is observed over a compliant surface. This observation indicates that drag reduction is possible using a compliant surface that is deformed passively by wall pressure fluctuation. A small wall displacement and ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 11  شماره 3

صفحات  157- 166

تاریخ انتشار 1998-08-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023