Three-dimensional numerical modeling of score hole in rectangular side weir with finite volume method

نویسندگان

  • Azam Abdollahi PhD Student, Faculty of Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran
  • Mehdi Azhdari Moghadam Associate Professor, Faculty of Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran
  • samira ghotbi Master graduated, Faculty of Civil Engineering, University of Sistan and Baluchestan, Zahedan, Iran
چکیده مقاله:

Local scouring in the downstream of hydraulic structures is one of the important issues in river and hydraulic engineering, which involves a lot of costs every year, so the prediction of the rate of scour is important in hydraulic design. Side weirs are the most important of hydraulic structures that are used in passing flow. This study investigate the scouring due to falling jet from side weir in downstream in side channel numerically. The simulation was done with finite volume method. The comparison of numerical and experimental results of flow fields shows agreement. Results show that from upstream to downstream of side weir located in side channel, scoring is increased and the dimensions of the scour hole in the downstream of the rectangular side weirs increase along it. In fact, at the downstream of the lower edge of side weirs in side channel, scouring has the greatest dimensions; in particular the depth.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Developing the Numerical method and MLP Model to simulation of flow over side weir

Side weir is a type of weirs that used extensively in a variety ofengineering projects such as river engineering, dam,waste water , Irrigation and drainage network. So the study on the flow characteristics on the type weir, is one of the mostimportant topics in hydraulic engineering. The spatially varied flow (S.V.F)with discharge decreasing is governing equation to this type weir.Study on the ...

متن کامل

The central-upwind finite-volume method for atmospheric numerical modeling

A semi-discretized central-upwind finite-volume (CFV) scheme has been developed for atmospheric modeling applications. The non-oscillatory property of the scheme is achieved by employing high-order weighted essentially non-oscillatory (WENO) reconstruction method, and time integration relies on explicit Runge-Kutta method. The WENO reconstruction is fifth-order accurate and implemented in a dim...

متن کامل

A finite-volume ELLAM for three-dimensional solute-transport modeling.

A three-dimensional finite-volume ELLAM method has been developed, tested, and successfully implemented as part of the U.S. Geological Survey (USGS) MODFLOW-2000 ground water modeling package. It is included as a solver option for the Ground Water Transport process. The FVELLAM uses space-time finite volumes oriented along the streamlines of the flow field to solve an integral form of the solut...

متن کامل

Three-dimensional numerical modeling of flow field in rectangular shallow reservoirs

Flow field in shallow waters, which is characterized by its complex mixing process and inherent dynamic nature, is interesting mainly due to its practical importance (e. g. in free flushing operation and sedimentation in large reservoirs). 3D numerical models make it possible to track two-dimensional large turbulence coherent structures, which are the dominant phenomenon in shallow reservoirs f...

متن کامل

Cooling Performance Analysis of Water-Cooled Heat Sinks with Circular and Rectangular Minichannels Using Finite Volume Method

In this paper, the cooling performance of water-cooled heat sinks for heat dissipation from electronic components is investigated numerically. Computational Fluid Dynamics (CFD) simulations are carried out to study the rectangular and circular cross-sectional shaped heat sinks. The sectional geometry of channels affects the flow and heat transfer characteristics of minichannel heat sinks. T...

متن کامل

Modeling of pollutant transmission in rivers By using Finite volume method and ANFIS model

Study in surface water quality is important. Rivers are one of the main sources of water supply fordrinking, agriculture and industry. Unfortunately, sometime Rivers where wastewater dischargesare considered. For this reason,the pollutant transmission in river is one of the most importantproblems in Environmental Engineering. the Advection Dispersion Equation (ADE) is governedon the pollutant t...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 3  شماره 2

صفحات  22- 31

تاریخ انتشار 2017-12-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023