Three-dimensional CFD modeling of fluid flow and heat transfer characteristics of Al2O3/water nanofluid in microchannel heat sink with Eulerian-Eulerian approach

In this paper, three-dimensional incompressible laminar fluid flow in a rectangular microchannel heat sink (MCHS) using Al2O3/water nanofluid as a cooling fluid is numerically studied. CFD prediction of fluid flow and forced convection heat transfer properties of nanofluid using single-phase and two-phase model (Eulerian-Eulerian approach) are compared. Hydraulic and thermal performance of microchannels are investigated according to the results of the friction factor, pumping power, average heat transfer coefficient, thermal resistance, average temperature of the walls and entropy generation. In addition, due to the CFD results, two correlations for predication of Nusselt number and friction factor are presented. Comparing the predicted Nusselt number using single-phase and two-phase models with experimental data shows that the two-phase model is more accurate than single-phase model. The results show that increasing the volume fraction of nanoparticles leads to increases the heat transfer coefficient and reduces the heat sink wall temperature, but it leads to the undesirable effect of increase in pumping power and total entropy generation.