THE EFFECT OF GRAPHITE ADDITION ON CORROSION BEHAVIOR OF TAR BONDED DOLOMITE REFRACTORIES IN STEELMAKING CONVERTER

Abstract: Dolomite based refractories are widely used in Iranian steelmaking plants. In the present research, wear and corrosion of refractories used in steel-making converter lining in Esfahan Steel Company was studied. Post-mortem analysis of refractories clarified that the wear started with oxidation of carbon followed by chemical corrosion. Iron oxide from slag reacted with calcia, resulting in formation of low melting phase, and subsequent washout process, caused the refractory corrosion onset from the hot face. In addition, the effect of aluminum as an anti-oxidant and graphite on the corrosion resistance of refractory was investigated. Tar-dolomite samples containing different amount of graphite (0, 4, 7, and 10 wt. %) were prepared in order to study their physical properties, before and after coking. SEM micrographs employed to analyze the microstructures to determine the effect of graphite and antioxidant on corrosion behavior of the refractory. Results showed that oxidation process of carbon in the system was hindered and improved corrosion resistance by introducing graphite and antioxidant into the refractory composition.