The Effect of cathode Porosity on Solid Oxide Fuel Cell Performance
نویسندگان
چکیده مقاله:
In the present study, the effect of porosity on the cathode microstructure (50:50 wt. % LSM: YSZ) of a Solid Oxide Fuel Cell (SOFC) has been examined. A 3-D finite element method for Mixed Ionic and Electronic Conducting Cathodes (MIEC) is presented to study the effects of porosity on cell performance. Each microstructure was realized using the Monte Carlo approach with the isotropic type of growth rate. The effect of porosity on the cathode of a solid oxide fuel cell involving the Three Phase Boundary Length (TPBL), electric conductivity of LSM phase, ionic conductivity of YSZ, mechanical behavior and tortuosity of the pore phase were explored in the present work. The cathode having a porosity value between 31 and 34% revealed the maximum TPBL value as well as a high variation in the electrical conductivity of the LSM phase. Pore phase tortuosity was also decreased by increasing the porosity factor.
منابع مشابه
the effect of cathode porosity on solid oxide fuel cell performance
in the present study, the effect of porosity on the cathode microstructure (50:50 wt. % lsm: ysz) of a solid oxide fuel cell (sofc) has been examined. a 3-d finite element method for mixed ionic and electronic conducting cathodes (miec) is presented to study the effects of porosity on cell performance. each microstructure was realized using the monte carlo approach with the isotropic type of gr...
متن کاملEffect of recycling solid oxide fuel cell products on the performance of a SOFC-Gas turbine hybrid system
In this study, the effect of recycling fuel cell products on the performance of a solid oxide fuel cell and gas turbine (SOFC-GT) hybrid system was investigated. Three types of products recycling are considered: cathode products recycling (CPR), anode products recycling (APR), and both cathode and anode products recycling (BACPR). In the present work, operating temperature and limiting curre...
متن کاملChemical precipitation and characterization of multicomponent Perovskite Oxide nanoparticles – possible cathode materials for low temperature solid Oxide fuel cell
A set of multicomponent perovskite oxide nanoparticles based on La1-xSrxCo1-yFeyO3-δ(LSCF) were prepared by a simple chemical precipitation method for application in low temperature solid oxide fuel cells (LT-SOFC) as cathode materials. The precursor materials used in this synthesis were lanthanum nitrate hexahydrate [La(NO3)<su...
متن کاملEvaluation of Ca3Co2O6 as cathode material for high-performance solid-oxide fuel cell
A cobalt-based thermoelectric compound Ca(3)Co(2)O(6) (CCO) has been developed as new cathode material with superior performance for intermediate-temperature (IT) solid-oxide fuel cell (SOFC). Systematic evaluation has been carried out. Measurement of thermal expansion coefficient (TEC), thermal-stress (σ) and interfacial shearing stress (τ) with the electrolyte show that CCO matches well with ...
متن کاملChemical precipitation and characterization of multicomponent Perovskite Oxide nanoparticles – possible cathode materials for low temperature solid Oxide fuel cell
A set of multicomponent perovskite oxide nanoparticles based on La1-xSrxCo1-yFeyO3-δ(LSCF) were prepared by a simple chemical precipitation method for application in low temperature solid oxide fuel cells (LT-SOFC) as cathode materials. The precursor materials used in this synthesis were lanthanum nitrate hexahydrate [La(NO3)<su...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 3 شماره 1
صفحات 25- 32
تاریخ انتشار 2015-01-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023