Synthesis of polyvinyl pyridine/C60 conjugates in supercritical carbon dioxide*

نویسندگان

  • M. G. H. Zaidi Department of Chemistry, G.B. Pant University of Agriculture & Technology Pant Nagar Uttaranchal 263145 India
  • N. Bhullar Department of Chemistry, G.B. Pant University of Agriculture & Technology Pant Nagar Uttaranchal 263145 India ,
  • R. Singh Directorate of Extramural Research and Intellectual Property Rights, D.R.D.O. Bhawan ,New Delhi, 110011. India
  • S. Alam Polymer Division Defense Materials Research Development & Establishment DMSRDE Kanpur208 013 UP India.
چکیده مقاله:

In the present investigation efforts have been made to synthesis polyvinyl pyridine (PvPy) /C60 conjugates through 2, 2-azobisisobutyronitrile (AIBN) initiated insitu polymerization of PvPy in scCO2.The process of synthesis was monitored under different reaction conditions ranging 1200-1800psi, 60-90 oC over 6 hours. The progress of polymerization was monitored rheoviscometrically. The concentration of PvPy and AIBN ranging 6.95-20.85*10-3 and 304.50-931.50 *10-3 afforded PvPy/C60 conjugates in the yield (%) ranging 10.30-48.8. Selected PvPy/C60 conjugates were characterized through UV-VIS spectra, scanning electron microscopy, gel permeation chromatography and solution rheoviscometery.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

synthesis of polyvinyl pyridine/c60 conjugates in supercritical carbon dioxide*

in the present investigation efforts have been made to synthesis polyvinyl pyridine (pvpy) /c60 conjugatesthrough 2, 2-azobisisobutyronitrile (aibn) initiated insitu polymerization of pvpy in scco2.the processof synthesis was monitored under different reaction conditions ranging 1200-1800psi, 60-90 oc over 6hours. the progress of polymerization was monitored rheoviscometrically. the concentrati...

متن کامل

Measurement and Modeling of Acridine Solubility in Supercritical Carbon Dioxide

Supercritical carbon dioxide has gained increasing attention in food and pharmaceutical processing owing to the fact that it is environmentally inexpensive, not flammable, essentially non-toxic, and it has a convenient critical point. Also, it has been attracting much attention in many fields, such as extraction of sensitive materials and pharmaceutical processing and polymerization processes. ...

متن کامل

Synthesis of amides and lactams in supercritical carbon dioxide.

Supercritical carbon dioxide can be employed as an environmentally friendly alternative to conventional organic solvents for the synthesis of a variety of carboxylic amides. The addition of amines to ketenes generated in situ via the retro-ene reaction of alkynyl ethers provides amides in good yield, in many cases with ethylene or isobutylene as the only byproducts of the reaction. Reactions wi...

متن کامل

Synthesis of Polyurethane Particles in Supercritical Carbon Dioxide

SUPERCRITICAL CARBON DIOXIDE Eric Cloutet, Benjamin Renault, Thierry Tassaing, Patrick Lacroix-Desmazes, Henri Cramail Laboratoire de Chimie des Polymères Organiques, ENSCPB-CNRS-Université Bordeaux 1 (UMR 5629), 16 Avenue Pey-Berland, 33607 Pessac cedex, France Institut des Sciences Moléculaires, CNRS-Université Bordeaux 1 (UMR 5255), 351 Cours de la Libération, 33405 Talence cedex, France Lab...

متن کامل

Synthesis of cross-linked polymer microspheres in supercritical carbon dioxide

Herein we report the synthesis of highly cross-linked polymers based on divinylbenzene by heterogeneous polymerization in supercritical CO2 (scCO2). The polymers were isolated in the form of discrete microspheres (diameter = 1.5–5 lm) in good yields (F90%), in the absence of any stabilizers. In the presence of a CO2-soluble polymeric stabilizer, much smaller particles (diameter a0.5 lm) were fo...

متن کامل

Synthesis of Mesoporous Organosilicate Films in Supercritical Carbon Dioxide

strate for the resist. After spin-coating, the polymer was gently softbaked at 40 °C to evaporate the solvent. The SU-8 was then structured by UV lithography (k= 365 nm) and post-exposure-baked at 40 °C to polymerize the exposed material. Three-dimensional microsystems were achieved by adding further SU-8 layers and repeating the resist processing steps. The microdevices were finally developed ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 3  شماره 1

صفحات  63- 68

تاریخ انتشار 2007-12-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023