Synthesis of Polybutadiene Nanoparticles via Emulsion Polymerization: Effect of Reaction Temperature on the Polymer Microstructure, Particle Size and Reaction Kinetics

نویسندگان

  • Fardin Seyyed Najafi Reseach and Development Center, Tabriz Petrochemical Company, Tabriz, Iran
  • Fatemeh Rekabdar Division of Polymer Science and Technology, Research Institute of Petroleum Industry, P.O. Box: 14665-1998, Tehran, Iran
  • Heidar Ranjbar Reseach and Development Center, Tabriz Petrochemical Company, Tabriz, Iran
  • Mahdi Abdollahi Polymer Engineering Department, Faculty of Chemical Engineering, Tarbiat Modares University, P.O.BOX:14115-143, Tehran, Iran;Division of Polymer Science and Technology, Research Institute of Petroleum Industry, P.O. Box: 14665-1998, Tehran, Iran
  • Mohammad Reza Yousefi Division of Polymer Science and Technology, Research Institute of Petroleum Industry, P.O. Box: 14665-1998, Tehran, Iran
  • Parisa Alamdar Polymer Engineering Department, Faculty of Chemical Engineering, Tarbiat Modares University, P.O.BOX:14115-143, Tehran, Iran
چکیده مقاله:

Polybutadiene nanoparticles were synthesized via batch emulsion polymerization of butadiene in the presence of potassium persulfate, disproportionate rosinate potassium cation and t-dodecyl mercaptane as initiator, emulsifier and chain transfer agent, respectively. Polymerization reaction was performed at different temperatures (60, 70 and 80 °C). Conversion was measured at the various time intervals by gravimetry method. Particle size and its distribution of the polybutadiene latex were measured by dynamic light scattering (DLS) and SEM analyses. Polymer microstructure was investigated by FT-IR spectroscopy. By increasing the polymerization temperature, average diameter of polybutadiene nanoparticles decreased from 104 nm (at final conversion of 80.6%) at 60 °C to 88.7 nm (at final conversion of 98.0%) at 80 °C. Dominant microstructure, i.e. 1,4-trans isomer content, in the synthesized polymers was calculated to be about 60%. Results showed that by increasing the reaction temperature, particles’ size decreases while number of the polymer particles and polymerization rate increase.            

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

synthesis of polybutadiene nanoparticles via emulsion polymerization: effect of reaction temperature on the polymer microstructure, particle size and reaction kinetics

polybutadiene nanoparticles were synthesized via batch emulsion polymerization of butadiene in the presence of potassium persulfate, disproportionate rosinate potassium cation and t-dodecyl mercaptane as initiator, emulsifier and chain transfer agent, respectively. polymerization reaction was performed at different temperatures (60, 70 and 80 °c). conversion was measured at the various time int...

متن کامل

the effects of temperature, initiator and stabilizer on polymer particle size in suspension polymerization of styrene

in suspension polymerization, particle size distribution of polymer is the outcome of dynamic equilibrium between the break up and coalescence phenomena. the rates of break up and coalescence and consequently polymerization stability depend on several parameters, the most important of which are type and concentration of stabilizer. in this study, the effects of type and concentration of stabili...

متن کامل

Synthesis and identification of polystyrene via conventional and controlled radical polymerization methods: Effect of temperature, initiator and transfer agent on molecular weight and reaction rate

Polystyrene (PSt) has been known as one of the important polymers with a wide range of applications. Ability to synthesize PSt with different but predictable molecular weights for various applications is very important in the laboratories and industries. In this study, using various simple and inexpensive techniques with only free radical mechanism, it was tried to synthesize PSt with different...

متن کامل

Synthesis of nano-sized ceria (CeO2) particles via a cerium hydroxy carbonate precursor and the effect of reaction temperature on particle morphology

Cerium oxide (CeO2) or ceria has been shown to be an interesting support material for noble metals in catalysts designed for emission control, mainly due to its oxygen storage capacity. Ceria nanoparticles were prepared by precipitation method. The precursor materials used in this research were cerium nitrate hexahydrate (as a basic material), potassium carbonate and potassium hydroxide (as pre...

متن کامل

Theoretical analysis of the effect of particle size and support on the kinetics of oxygen reduction reaction on platinum nanoparticles.

We perform a first-principles based computational analysis of the effect of particle size and support material on the electrocatalytic activity of platinum nanoparticles. Using a mechanism for oxygen reduction that accounts for electric field effects and stabilization from the water layer on the (111) and (100) facets, we show that the model used agrees well with linear sweep voltammetry and ro...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 1  شماره Number 1

صفحات  1- 16

تاریخ انتشار 2014-02-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023