Surface Modified Cobalt Ferrite Nanoparticles with Cationic Surfactant: Synthesis, Multicomponent Dye Removal Modeling and Selectivity Analysis

Synthesis and Surfactant Effect on Structural Analysis of Nickel Doped Cobalt Ferrite Nanoparticles by C-precipitation Method

Nanoparticles of nickel substituted cobalt ferrite (Nix Co1-xFe2 O4 : 0£ X£ 1) have been synthesized by co-precipitation method. Triton x-100 and oleic acid as surfactants were used. Particles size as estimated by the full width half maximum (FWHM) of the strongest X-ray diffraction (XRD) peak were found 17 and 21nm. Their morphology structure have been determined by scanning electron microscop...

Synthesis of nickel ferrite nanoparticles as an efficient magnetic sorbent for removal of an azo-dye: Response surface methodology and neural network modeling

In this research, nickel ferrite (NiFe2O4) nanoparticles (NFNs) are prepared through coprecipitation method, and applied for adsorption removal of a model organic pollutant, methyl orange (MO). The characterization of t...

Efficiency of Modified Zeolite with Cationic Surfactant Hexadecyltrimethylammonium Bromide in Removal of Diazinon from Aqueous Solutions

Background and purpose: Diazinon is one of the most widely used pesticides in agricultural pest control that pollutes water resources. The aim of this study was to evaluate the adsorption of diazinon from water by zeolite modified with cationic surfactant hexadecyltrimethyl ammonium bromide (HDTMA). Materials and methods: The amount of HDTMA surfactant used to modify the zeolite was one-fold E...

synthesis and surfactant effect on structural analysis of nickel doped cobalt ferrite nanoparticles by c-precipitation method

An investigation on synthesis and magnetic properties of nanoparticles of Cobalt Ferrite coated with SiO2

SiO2-coated Cobalt Ferrite (CoFe2O4) nanoparticles were obtained by the hydrolysis of tetraethylorthosilicate in the presence of CoFe2O4 nanoparticles in co-precipitation. The effects of SiO2coating on the magnetic properties of CoFe2O4 nanoparticles were investigated. The structural, morphological and magne...

Cationic surfactant modified wood sawdust for removal of acidic dyes

In this paper, application of sawdust prepared from Narra wood (SD) modified with cationic surfactant of cetyltrimethylammonium bromide (SD/CTAB) was used for removal of two typical acid dyes commercially named as Acid Green 25 (AG25) and Acid Red 14 (AR14) from aqueous solutions. The effects of experimental variables, such as pH, initial dye concentration, adsorbent dose, contact time and temp...