Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics
نویسندگان
چکیده مقاله:
In this paper, lead free (K0.48,Na0.52)NbO3 (KNN(48-52)) piezoelectric ceramics were made by conventional solid state sintering process. Additives of nano ZnO (n-ZnO), nano CuO (n-CuO) and nano SnO2 (n-SnO2) were used in order to decrease the sintering temperature, as well as modifying the dielectric, piezoelectric and ferroelectric properties. Phase structure and microstructure were analyzed using X-ray diffractometry and scanning electron microscopy techniques. The largest piezoelectric constant of d33= 150 pC/N was obtained for KNN (48-52) with 0.6 mol% n-ZnO at sintering temperature of 1070 °C, which is two times larger than that of pure KNN (48-52) at higher sintering temperatures. Additionally, KNN(48-52) ceramics co-doped with 0.8 mol% n-ZnO, 0.5 mol% n-CuO and 0.8 mol% n-SnO2, showed dielectric and piezoelectric properties of d33= 97 pC/N, tanδ = 0.006 and εr = 172 at sintering temperature of 960 ºC, which are much better than corresponding values for pure KNN at 1110 ºC.
منابع مشابه
Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics
Lead free potassium sodium niobate (KNN) piezoceramics were synthesized via conventional solid state sintering route. Nano and micron WO3 were separately added to KNN through ball-milling. Dielectric and piezoelectric properties of samples sintered in the temperature range of 1110°-1145°C were measured by precision LCR-meter and APC d33-meter devices. The results revealed that micron WO3 partic...
متن کاملThe effect of titanium dioxide and molybdenum oxide on the properties of sodium potassium niobate piezoceramic
Sodium potassium niobate piezoceramics are considered as lead-free piezoelectric due to their good properties. In this study, the effect of titanium dioxide and molybdenum oxide as dopant on the densification behavior, piezoelectric and dielectric properties of lithium doped sodium potassium niobate ((K0.5Na0.5)0.94Li0.06NbO3, KNNL) was investigated. For this purpose, (K0.5Na0.5)0.94Li0.06Nb0.9...
متن کاملthe effects of planning on accuracy and complexity of iranian efl students’ written narrative task performance
this study compared the different effects of form-focused guided planning vs. meaning-focused guided planning on iranian pre-intermediate students’ task performance. the study lasted for three weeks and concentrated on eight english structures. forty five pre-intermediate iranian students were randomly assigned to three groups of guided planning focus-on-form group (gpfg), guided planning focus...
15 صفحه اولStudying the effects of adding CeO2 and CuO on electrical properties of lead free (Ba0.85Ca0.15)(Zr0.1Ti0.9)O3 piezoceramics
Lead-free (Ba0.85Ca0.15)[(Zr0.1Ti0.9)]O3 (BCZT) piezoceramics were synthesized using solid-state ceramic processing. In order to improve the electrical properties CeO2 and CuO additives/dopants were used and two methods were employed to introduce theses oxides; one, in which 0.1 mol.% CeO2 was mixed with the raw materials and the composition was balanced for A-site substitution (BCCe0.1ZT) and ...
متن کاملthe effects of time planning and task complexity on accuracy of narrative task performance
هدف اصلی این تحقیق بررسی تاثیر برنامه ریزی زمانی، هم چنین افزایش میزان پیچیدگی تکالیف در نظر گرفته شده بصورت همزمان، بر دقت و صحت و پیچیدگی عملکرد نوشتاری زبان آموزان می باشد. بدین منظور، 50 نفر از دانش آموزان دختر در رده ی سنی 16 الی 18 سال به عنوان شرکت کنندگان در این زمینه ی تحقیق در نظر گرفته شدند و به دو گروه آزمایشی و کنترل بصورت اتفاقی تقسیم شدند. اعضای گروه آزمایشی هر دو تکلیف ساده و پی...
Sintering of Lead-Free Piezoelectric Sodium Potassium Niobate Ceramics
The potassium sodium niobate, K0.5Na0.5NbO₃, solid solution (KNN) is considered as one of the most promising, environment-friendly, lead-free candidates to replace highly efficient, lead-based piezoelectrics. Since the first reports of KNN, it has been recognized that obtaining phase-pure materials with a high density and a uniform, fine-grained microstructure is a major challenge. For this rea...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 4 شماره 2
صفحات 7- 15
تاریخ انتشار 2018-05-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023