STUDY ON CORROSION PROPERTIES OF PLASMA NITRIDED PURE ALUMINIUM
نویسندگان
چکیده مقاله:
Abstract: In this research plasma nitriding of pure aluminium and effect of iron elemental alloy on the formation and growth of aluminium nitride was investigated. Also corrosion properties of formed AlN were investigated. After preparation, the samples were plasma nitrided at 550oC, for 6, 9 and 12 h and a gas mixture of 25%H2-75%N2. The microstructure and phases analysis were investigated using scanning electron microscopy and X-ray diffraction analysis. Moreover corrosion resistance of samples was investigated using polarization techniques. The results showed that only a compound layer was formed on the surface of samples and no diffusion zone was detected. Dominant phase in compound layer was AlN. Scanning electron microscopy results showed that nitride layer has particulate structure. These nitrided particles have grown columnar and perpendicular to the surface. It was also observed that the existence of iron in the samples increases the nitrogen diffusion, thus growth rate of iron containing nitrides are higher than the others. Corrosion tests results showed that formation of an aluminium nitride layer on the surface of aluminium decreases the corrosion resistance of aluminium significantly. This is due to elimination of surface oxide layer and propagation of cracks in the formed nitride layer
منابع مشابه
The Mechanical Properties of Plasma Nitrided Layers
The article deals with mechanical properties of layers which were created by plasma nitriding technology. Nitrided layers apply to steel AISI 4140 were evaluated by metallographic method, GDOES method, microanalysis method and microhardness method. The trend of mechanical properties was experimentally obtained in dependence on length of cavity during plasma nitriding process. Moreover, the infl...
متن کاملINVESTIGATION NITRIDE LAYERS AND PROPERTIES SURFACES ON PULSED PLASMA NITRIDED HOT WORKING STEEL AISI H13
Nitriding is a surface treatment technique used to introduce nitrogen into metallic materials to improve their surface hardness, mechanical properties, wear resistance and corrosion resistance. In this research, the effects of plasma nitriding parameters including frequency and duty cycle were investigated on samples with different grooves dimensions. Steel blocks prepared from DIN1.2344 hot wo...
متن کاملStudy of corrosion in aluminium using neutron radiography technique
Neutron rad i ()~ra ph y techn ique has hecn ;ILiopted lo r detecti on or co rrosion in aluminium hy rillin g ,Irti riciall y l11ade hol cs (1n al uminium slah with 1\1(01-1),. Thc cont ras t hetwcen the opti c;iI densi ties or corrosion products and ;;lu lll i niulll slah W; IS ;Issessed rrom the densitolllctri c l11easu rements. Vari ati oll o r opti cal density difference with sample thickn ...
متن کاملa study on construction of iranian life tables: the case study of modified brass logit system
چکیده ندارد.
15 صفحه اولEffects of Cryo-Treatment on Corrosion Behavior and Mechanical Properties of Laser-Welded Commercial Pure Titanium
The objective of this study was to investigate the effects of cryo-treatment on the microstructure, corrosion behavior, and mechanical properties of Ti before and after laser welding. The microstructure was studied by optical microscopy. It was found that the grain size for Ti became smaller after cryo-treatment. Cryo-treatment could also refine and stabilize the crystal lattice structure and d...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 6 شماره 4
صفحات 0- 0
تاریخ انتشار 2009-12
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023