Studies of Drop Behavior and Prediction of Sauter Mean Drop Diameter in Various Rotary Agitated Extraction Columns
نویسندگان
چکیده مقاله:
Knowledge of droplet behavior is one of the most important criteria for determination of mass transfer kinetics for choosing the type of liquid-liquid extraction columns. Mean drop size data of dispersed phase droplets in continuous phase have been obtained for Various Rotary Agitated Liquid-Liquid Extraction Columns . The effects of operational variables such as mass transfer directions with acetone transfer, rotor speed and dispersed and continuous phase velocities have been investigated. The Satuer mean drop diameter was influenced mainly by mass transfer direction and agitation speed. In this research work, previous experimental works in agitated extraction columns (RDC, ARDC, PRDC, Scheibel, Oldshue-Rushton and Kühni columns) are reviewed. Calculations with the literature correlations cannot predict experimental data, thus unified correlations considering the physical properties, operating conditions and geometric parameters were provided to predict the mean drop size (d32). The results of the proposed correlation were compared with the experimental data obtained from the literature and the present investigation. This correlation covers several physical systems for various rotary agitated extractors. Findings of this study demonstrated that the proposed correlation leads to an accurate prediction for the Satuer mean drop diameter in rotary extraction columns.
منابع مشابه
Modelling of Mean Drop Size in a Extraction Spray Column and Developing a New Model
In the present investigation the biosorption potential of rosa gruss an teplitz (Red Rose) Waste Biomass (RRWB) for the removal of Pb(II) and Co(II) from aqueous solutions was studied. The effect of different process parameters such as pH, biosorbent dose, biosorbent size, temperature, contact time, initial metal concentration and pretreatments on the biosorption capacity of this waste biom...
متن کاملDrop-breakage in Agitated Liquid-liquid Dispersions
Experimental data from batch vessels on cumulative volumetric drop-size distributions at various times are shown to yield useful information on probabilities of droplet-breakup as a function of drop-size. Such information is sufficient for a priori prediction of drop-sizes in agitated dispersions in batch and continuous vessels. It may also be useful in predicting heat and/or mass transfer in l...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Presenting an Empirical Correlation for Maximum Sauter Mean Diameter in a Spray Extraction Column
Based on the importance of drops' behavior in liquid-liquid extraction, the maximum sauter mean drop diameter has been investigated and correlated in a counter-current spray extraction column with two chemical systems. Spargers were set of nozzles in all experiments. Studying the effects of several parameters on drops size, some correlations were estimated by the last available version of softw...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 29 شماره 8
صفحات 1047- 1055
تاریخ انتشار 2016-08-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023