Stress Analysis of Rotating Thick Truncated Conical Shells with Variable Thickness under Mechanical and Thermal Loads

نویسندگان

  • M Ghannad Mechanical Engineering Faculty, Shahrood University, Shahrood, Iran
  • M Jabbari Mechanical Engineering Department, Yasouj University, P.O.Box: 75914-353, Yasouj, Iran
  • M Zamani Nejad Mechanical Engineering Department, Yasouj University, P.O.Box: 75914-353, Yasouj, Iran
چکیده مقاله:

In this paper, thermo-elastic analysis of a rotating thick truncated conical shell subjected to the temperature gradient, internal pressure and external pressure is presented. Given the existence of shear stress in the conical shell due to thickness change along the axial direction, the governing equations are obtained based on first-order shear deformation theory (FSDT). These equations are solved by using multi-layer method (MLM). The model has been verified with the results of finite element method (FEM). Finally, some numerical results are presented to study the effects of thermal and mechanical loading, geometry parameters of truncated conical shell.  

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

stress analysis of rotating thick truncated conical shells with variable thickness under mechanical and thermal loads

in this paper, thermo-elastic analysis of a rotating thick truncated conical shell subjected to the temperature gradient, internal pressure and external pressure is presented. given the existence of shear stress in the conical shell due to thickness change along the axial direction, the governing equations are obtained based on first-order shear deformation theory (fsdt). these equations are so...

متن کامل

An Investigation of Stress and Deformation States of Rotating Thick Truncated Conical Shells of Functionally Graded Material

The present study aims at investigating stress and deformation behavior of rotating thick truncated conical shells subjected to variable internal pressure. Material prpperties of the shells are graded along the axial direction by Mori-tanaka scheme, which is achieved by elemental gradation of the properties.Governing equations are derived using principle of stsionary total potential (PSTP) and ...

متن کامل

Thermoelastic Analysis of Rotating Thick Truncated Conical Shells Subjected to Non-Uniform Pressure

In the present work, a study of thermoelastic analysis of a rotating thick truncated conical shell subjected to the temperature gradient and non-uniform internal pressure is carried out. The formulation is based on first-order shear deformation theory (FSDT), which accounts for the transverse shear. The governing equations, derived using minimum total potential energy principle, are solved, usi...

متن کامل

Linear Thermoplastic Analysis of FGM Rotating Discs with Variable Thickness

This work presents thermoplastic analysis of FG rotating diskswith variable thickness and constant angular velocity. The solutions are obtained by variable material property (VMP) theory. In this theory, the domain is divided into some finite sub-domains in the radial direction, in which the properties are assumed to be constant and the form of the elastic response is used to solve elastic-plas...

متن کامل

Stress Analysis of FGM Rotating Disk Subjected to Mechanical and Thermal Loads In Aircraft Gas Turbine Engine

Pursuant to the high usage of rotating the disk in aircraft gas turbine engine, turbo pumps in oil and gas industries, steam and gas turbines in power plants, marine gas turbine and other industrial rotary machines designing and getting under the mechanical and thermal loading casued this design and analysis to be as a special significance. These disks are subjected to mechanical and thermal lo...

متن کامل

A Semi-Analytical Solution for Elastic Analysis of Rotating Thick Cylindrical Shells with Variable Thickness Using Disk Form Multilayers

Using disk form multilayers, a semi-analytical solution has been derived for determination of displacements and stresses in a rotating cylindrical shell with variable thickness under uniform pressure. The thick cylinder is divided into disk form layers form with their thickness corresponding to the thickness of the cylinder. Due to the existence of shear stress in the thick cylindrical shell wi...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 9  شماره 1

صفحات  100- 114

تاریخ انتشار 2017-03-30

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023