Stiffness-based Approach for Preliminary Design of Framed Tube Structures

investigating the feasibility of a proposed model for geometric design of deployable arch structures

deployable scissor type structures are composed of the so-called scissor-like elements (sles), which are connected to each other at an intermediate point through a pivotal connection and allow them to be folded into a compact bundle for storage or transport. several sles are connected to each other in order to form units with regular polygonal plan views. the sides and radii of the polygons are...

A wavelet-based approach for vibration analysis of framed structures

Free vibration analysis of steel framed structures

This study based on free vibration analysis and study the behavior of framed structure under different frequency of vibration using ANSYS software and shaking table. A small scale uni-axial shaking table was prepared in laboratory, which can produce lower to moderate vibration, regarding frequency and velocity. Moment resisting framed structures constructed with connecting beam and column eleme...

Numerical Study of Progressive Collapse in Framed Structures: A New Approach for Dynamic Column Removal (TECHNICAL NOTE)

Progressive collapse is a situation where local failure of a primary structural component leads to the collapse of adjoining members which, in turn, leads to additional collapse. Hence, the total damage is disproportionate to the original cause. The most common local failure in framed structure is assumed to be column failure. In this paper, a new approach for dynamic column removal in framed s...

Considering the Soil Effects on Design Process of Performance-Based Plastic Design for Reinforced Concrete Structures

In this research, Performance-Based Plastic Design (PBPD) method has been modified according to the proposed method for considering Soil–Structure Interaction (SSI) effects. In the proposed modified method, based on the existing relationships and in order to maintain the simplicity of the PBPD design method, two important parameters have been modified in the PBPD design method. These two parame...

Model Based Design approach for Implementation of PHEV Energy Management

Hardware implementation of the Plug-in hybrid electric vehicles (PHEVs) control strategy is an important stage of the development of the vehicle electric control unit (ECU). This paper introduces Model-Based Design (MBD) approach for implementation of PHEV energy management. Based on this approach, implementation of the control algorithm on an electronic hardware is performed using automatic co...