Simulation of Stresses Induced by Heat and Mass Transfer in Drying Process of Clay-like Material

نویسندگان

  • Khalil Khalili Department of mechanical engineering, University of Birjand, Birjand,Iran
  • Mohsen Heydari Ph.D. Student, Mech. Eng., University of Birjand, Birjand, Iran
  • Yousef Ahmadi Assoc. Prof., Mech. Eng., University of Birjand, Birjand , Iran
چکیده مقاله:

Drying represents one of the oldest unit operations employed in industrial processes. Drying is viewed as a process of simultaneous heat and mass transfer. Porous Clay-like material undergoes stresses due to non-uniform distribution of temperature and moisture induced by heat and mass transfer respectively. The aim of this work is to simulate the stresses induced by heat and mass transfer during drying. A mathematical model to simulate the convective drying of a porous material like clay has been developed. The problem investigated involves highly coupled equations considering heat, mass, and mechanical aspects. The particularity of the model is that it takes into account the strong coupling between mass transport, heat transport and mechanical behavior of the material. The variables of coupling are the solid deformation, moisture content and temperature of porous medium. A numerical solution is sought to foresee the variation of moisture content, temperature, shrinkage, heat transfer induced stresses and mass transfer induced stresses during drying. The solution developed as a model is capable of predicting the quality of the product through a failure criterion. The model is validated through the comparison of simulated and experimental data. Simulation results show that the heat transfer induced stresses are significantly less important in compression with the mass transfer induced stresses and can be neglected in modeling of drying process.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Heat and Mass Transfer in Leather Drying Process

Leather manufacturing involves a crucial energy-intensive drying stage in the finishing process to remove its residual moisture. Determining drying characteristics of leather is vitally important so as to optimize the drying stage. This paper describes an analytical way for determination of the drying characteristics of leather. The model presented, is based on fundamental heat and mass tra...

متن کامل

pragmatic transfer in compliment responses and chastisements by iranian learners of english

فرهنگ های گوناگون دریافت ها و تعبیر های مختلفی از تناسب و ادب دارند. بنابراین، ارتباط میان فرهنگی خطرات ذاتی خطای ارتباطی را نشان می دهد. این پژوهش به منظور تعیین وقوع انتقال منظورشناختی زبان در زبان بینابینی زبان آموزان ایرانی، اختلاف منظورشناختی زبان را بین فارسی و انگلیسی در کنش های کلامی پاسخ تحسین و انتقاد بررسی می کند.داده ها از میان 33 آمریکایی انگلیسی زبان، 85 زبان آموز ایرانی در سطوح م...

15 صفحه اول

heat and mass transfer in leather drying process

leather manufacturing involves a crucial energy-intensive drying stage in the finishing process to remove its residual moisture. determining drying characteristics of leather is vitally important so as to optimize the drying stage. this paper describes an analytical way for determination of the drying characteristics of leather. the model presented, is based on fundamental heat and mass transfe...

متن کامل

mathematical simulation of heat and mass transfer in convectional drying of carrot, pretreated by ultrasound and microwave

introduction drying foods, fruits and vegetables is a suitable method to reduce post-harvest losses of the crops. drying is considered as a simultaneous heat and mass transfer process. various physical, chemical and nutritional changes occur during drying of foods and are affected by a number of internal and external heat and mass transfer parameters. external parameters may include temperature...

متن کامل

On the computer simulation of heat and mass transfer in vacuum freeze–drying

The paper is devoted to studying the problem of freeze– drying which is a process of the dehydrating frozen materials by sublimation under high vacuum. The mathematical and the computer models describing this process are presented. The discretizations used and the numerical treatment of the corresponding ordinary and partial differential equations is discussed. The results of some test experime...

متن کامل

Modeling and Simulation of Heat Transfer Phenomenon in Steel Belt Conveyer Sulfur Granulating Process

Complex heat transfer phenomena (including unsteady state conduction, convection and solidification processes) occur in steel belt conveyer sulfur granulating method. Numerical simulation of this technique is performed via a comprehensive and multifaceted one dimensional model. Since the air situated between the adjacent sulfur pastilles is essentially stagnant, therefore, the surface tempe...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 48  شماره 2

صفحات  171- 184

تاریخ انتشار 2017-12-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023