Retrofitting of Reinforced Concrete Beams with Steel Fiber Reinforced Composite Jackets
نویسندگان
چکیده مقاله:
In the present study, a new method for retrofitting reinforced concrete beam is introduced in which steel-concrete composite jackets containing steel fiber is used. For this purpose, 75% of the peripheral surface of reinforced concrete beams was initially reinforced using steel plates and bolts, and steel fiber reinforced concrete was used between the steel plates and the peripheral surfaces of the beam. Thus, due to the relatively high tensile strength of concrete reinforced with steel fibers, not only the cross-section and moment of inertia of the beam will increase, but the tensile strength of the beam will also increase. The variables studied were steel fiber value (0, 1 and 2% by volume of concrete) and type of retrofitting (concrete jacket, steel-concrete composite jacket, and carbon fiber reinforced polymer (CFRP) sheet). Thus, 8 reinforced concrete beams were constructed and their response to four-point loading was compared by examining the parameters such as crack load, yield load, ultimate load, ductility, stiffness, and energy absorption capacity. The results showed that steel fiber-reinforced composite jackets delay the formation of the first crack in concrete and the yield of steel rebars with confinement and they result in an increase in energy absorption capacity of the beams by 89 to 129% depending on the amount of steel fiber. On the other hand, the use of steel-concrete composite jackets, due to their higher flexural stiffness, exhibits higher flexural capacity compared to steel-reinforced concrete jackets and CFRP sheets. They have a much better performance in terms of ductility.
منابع مشابه
Some Studies on Steel Fiber Reinforced Concrete
Fibres are generally used as resistance of cracking and strengthening of concrete. In this project, I am going to carry out test on steel fibre reinforced concrete to check the influence of fibres on flexural strength of concrete. According to various research papers, it has been found that steel fibres give the maximum strength in comparison to glass and polypropylene fibres. Hence, in this pr...
متن کاملMechanical Behavior of Steel Fiber-Reinforced Concrete Beams Bonded with External Carbon Fiber Sheets
This study investigates the mechanical behavior of steel fiber-reinforced concrete (SFRC) beams internally reinforced with steel bars and externally bonded with carbon fiber-reinforced polymer (CFRP) sheets fixed by adhesive and hybrid jointing techniques. In particular, attention is paid to the load resistance and failure modes of composite beams. The steel fibers were used to avoiding the rip...
متن کاملFlexural Cracks in Fiber-Reinforced Concrete Beams with Fiber-Reinforced Polymer Reinforcing Bars
Fiber-reinforced polymer (FRP) reinforcing bars have aTtracted considerable 0llellli0l1 for applications where corrosion of steel reinforcement is problemaric. Due 10 rhe generally low elastic modulus and poor bond clwracreristics of FRP as coil/pared 10 steel reinforcing bars, the use of FRP results in IGI:i?er crack widlhs under senJice loads. Fiber-reinforced concrete (FRe) is proposed for u...
متن کاملStepwise Regression for shear capacity assessment of steel fiber reinforced concrete beams
The addition of steel fibers into concrete improves the postcracking tensile strength of hardened concrete and hence significantly enhances the shear strength of reinforced concrete reinforced concrete beams. However, developing an accurate model for predicting the shear strength of steel fiber reinforced concrete (SFRC) beams is a challenging task as there are several parameters such as the co...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 33 شماره 5
صفحات 770- 783
تاریخ انتشار 2020-05-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023