Probability Assessment and Risk Management of Progressive Collapse in Strategic Buildings Facing Blast Loads

نویسندگان

چکیده مقاله:

Nowadays, as a result of increased terrorist and bomb attacks throughout the globe in the vicinity of strategic buildings, designing these structures against impact loads, particularly the blast-related ones, has been taken into more consideration. The current procedure for designing the structure against an explosion is a design against the local failure of the current elements in the first step and then, in the next step, against local damage as well as tactful thinking to prevent this damage from spreading to other parts of the structure. The present research investigates the impacts of explosives, derived from probable terror–stricken scenarios inside and outside a strategic four-story steel building with a special moment frame system. Then, the resistive capacity of the damaged building (due to blast) has been evaluated against the progressive collapse, and finally, the rate of the collapse risk and the reliability of the structure have been obtained by presenting a probable method. Thus, the vulnerable parts inside and outside the building are identified and safety measures have been determined, so that in case of no safety or excessive collapse risk- access to dangerous parts of the building could be reinforced or limited. Results show that progressive collapse probability and reliability of the building are 57% and 43% respectively.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

probability assessment and risk management of progressive collapse in strategic buildings facing blast loads

nowadays, as a result of increased terrorist and bomb attacks throughout the globe in the vicinity of strategic buildings, designing these structures against impact loads, particularly the blast-related ones, has been taken into more consideration. the current procedure for designing the structure against an explosion is a design against the local failure of the current elements in the first st...

متن کامل

progressive collapse evaluation of rc symmetric and asymmetric mid-rise and tall buildings under earthquake loads

plan irregularity causes local damages being concentrated in the irregular buildings. progressive collapse is also the collapse of a large portion or whole building due to the local damages in the structure. the effect of irregularity on the progressive collapse potential of the buildings is investigated in this study. this is carried out by progressive collapse evaluation of the asymmetric mid...

متن کامل

Comparison between Alternative Load Path Method and a Direct Applying Blast Loading Method in Assessment of the Progressive Collapse

Extensive research has been focused on the progressive collapse analysis of buildings and most of them are based on the alternative path method (APM) with sudden removal of one or several columns. However, in this method the damage of adjacent elements of removed columns under blast conditions was ignored and this issue can lead to an incorrect prediction of progressive collapse. Therefore, in ...

متن کامل

Analysis Procedures For Progressive Collapse of Buildings

This paper presents simple analytical approaches for evaluating progressive collapse potential of lowand mid-rise buildings that could be used in routine design by design professionals. Although nonlinear time history analysis would be more realistic in representing progressive collapse phenomenon, high fidelity structural models to represent nonlinear structural behavior are required to produc...

متن کامل

Investigation of the Progressive Collapse Potential in Steel Buildings with Composite Floor System

Abnormal loads due to natural events, implementation errors and some other issues can lead to occurrence of progressive collapse in structures. Most of the past researches consist of 2- Dimensional (2D) models of steel frames without consideration of the floor system effects, which reduces the accuracy of the modeling. While employing a 3-Dimensional (3D) model and modeling the concrete slab sy...

متن کامل

Effect of Initial Local Failure Type on Steel Braced Frame Buildings against Progressive Collapse

In many studies, the alternative load path method (APM) has been used for progressive collapse analysis. In this method, one or several columns of the building are removed and the building response is investigated. This method ignores the initial local failure cause of building and this can affect the structural response. Investigation of ignoring the initial local failure cause of steel braced...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 49  شماره 2

صفحات  327- 338

تاریخ انتشار 2016-12-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023