PREPARATION OF Fe/GLASS COMPOSITE BY REDUCTION OF Na2O– Fe2O3–B2O3–SiO2–ZnO GLASS AND GLASS CERAMICS

نویسندگان

  • A. Beitollahi
  • A. Mohammadpour
چکیده مقاله:

In the present study, the feasibility of α-Fe ferromagnetic phase formation in glass and glass-ceramic by reduction in hydrogen atmosphere have been investigated. The glass with the composition of 35Na 2 O–24Fe2O3–20B 2O3 – 20SiO 2 –1ZnO (mol %) was melted and quenched by using a twin roller technique. As quenched glass flakes were heat treated in the range of 400-675 °C for 1-2 h in hydrogen atmosphere, which resulted in reduction of iron cations to α-Fe and FeO. The reduction of iron cations in glass was not completely occurred. Saturation magnetization of these samples was 8-37 emu g -1 . For the formation of glass ceramic, As quenched glass flakes heat treated at 590 °C for 1 h. Heat treatment of glass ceramic containing magnetite at 675°C in hydrogen atmosphere for 1 h led to reduction of almost all of the iron cations to α-Fe. Saturation magnetization of this sample increased from 19.8 emu g -1 for glass ceramic to 67 emu g -1

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

CRYSTALLIZATION AND SINTERABILITY BEHAVIOR OF BIORESORBABLE CaO-P2O5-Na2O-TiO2 GLASS CERAMICS FOR BONE REGENERATION APPLICATION

Abstract:Some types of glass and glass ceramics have a great potential for making bone tissue engineering scaffolds, drug carrier and bone cements as they can bond to host bone, stimulate bone cells toward osteogenesis, and resorb at the same time as the bone is repaired. Calcium phosphate glass ceramics have very attractive properties that allow them to use in bone tissue engineering. Calcium ...

متن کامل

Processing and Characterization of Nanocrystalline Mica Glass-Ceramics

In order to fabrication of transparent glass-ceramics with Li-mica nano crystals, the glasses with chemical composition of 94.9 mass% Li(1+x)Mg3AlSi3(1+x)F2 (x=0.5) with 5.1 mass% MgF2 were crystallized. The glasses were fabricated via the conventional melt-quenching technique. Mica crystals were precipitated in the glass phase by later heat treatment. Glass samples had glass transition tempera...

متن کامل

Iron Phosphate Glass-ceramics

The crystallization of 40Fe2O3-60P2O5, 10ZnO-30Fe2O3-60P2O5 and (43.3−x)PbO–(13.7+x)Fe2O3–43P2O5, (0 < x < 30), glasses and glassceramic have been investigated. The structural evolution of glasses during heat treatment at various temperatures and the tendency for crystallization for series of glasses with modified composition are characterized by a dendrite-like phase separation in the early st...

متن کامل

Crystallisation of Foturan® glass–ceramics

hotostructurable glass–ceramics are suitable for 3-dimensional microfabrication and, in some instances, can be used as an alternative material o silicon in the microfabrication of micro-electro-mechanical-system (MEMS) devices. Foturan® is a photosensitive lithium–aluminium–silicate lass that can be structured by an exposure to UV light, followed by a thermal treatment and an etching step. In t...

متن کامل

Preparation and characterization of polyethylene/ glass fiber composite membrane prepared via thermally induced phase separation method

Grinded glass fiber (GGF) embedded high density polyethylene (HDPE) membranes were prepared via thermally induced phase separation method. FESEM images showed that all the membranes had leafy structure, indicating a solid-liquid mechanism during phase separation. The results of EDX and TGA analyses confirmed that the fibers were dispersed in the HDPE matrix uniformly. Normalized water flux of t...

متن کامل

Design and Properties of Glass-Ceramics

The regenerator glass-ceramic is produced as a honeycomb product for a turbine engine heat exchanger. It is made from a powdered glass frit, which as a slurry can impregnate paper that is wound as alternately corrugated sheets on a wheel. After firing, a porous ceramic regenerator wheel is produced that allows energy to be transferred from hot exhaust gases to the cold intake air in the turbine...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 12  شماره 3

صفحات  38- 47

تاریخ انتشار 2015-09

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023