Performance Analysis of a Variable Geometry Turbocharger Using Mean Line Method
نویسندگان
چکیده مقاله:
Turbocharging an engine boosts its power by increasing the amount of input air. This task is accomplished by using the exhaust gas to power a turbine which is engaged with a compressor. The Variable Geometry Turbocharger, VGT is a unique turbocharger that the diffuser vane angle can be changed over a wide range of positions. The mathematics of turbomachinery flow analysis is intensive and uses iterative methods. Most of the flow analyses in the area of turbochargers are either experimental or numerical. Three-dimensional Computational Fluid Dynamics (CFD), two-dimensional multiple streamline and one dimensional mean line is the three primary numerically available methods. In this paper a mean line method has been used for predicting the performance of a centrifugal compressor with variable diffuser vane angle position at subcritical Mach numbers. The calculation is based on common thermodynamic and aerodynamic principles, and empirical correlations for losses in a mean line analyses. The model calculates the velocities, pressures, temperatures, pressure losses, work consumption, and efficiencies for a specified set of turbocharger geometry, atmospheric conditions, rotational speed, and fluid mass flow rate. The obtained numerical results are validated with the in house measured experimental data and good agreement observed. The purpose for compressor model analysis is to generate overall characteristic map and identify the impact of the diffuser vane angles on the performance. The overall characteristic map is generated by this method demonstrate very good agreement and the effect of variable vane angle in pressure ratio and operating range observed.
منابع مشابه
performance analysis of a variable geometry turbocharger using mean line method
turbocharging an engine boosts its power by increasing the amount of input air. this task is accomplished by using the exhaust gas to power a turbine which is engaged with a compressor. the variable geometry turbocharger, vgt is a unique turbocharger that the diffuser vane angle can be changed over a wide range of positions. the mathematics of turbomachinery flow analysis is intensive and uses ...
متن کاملUnsteady Performance Analysis of a Twin-entry Variable Geometry Turbocharger Turbine
The unsteady performance of a twin-entry variable geometry turbine for an automotive turbocharger is presented. A single-entry variable geometry turbine was initially designed based on a commercial nozzle-less turbine. The variable geometry single-entry volute was later modified to twin-entry through partitioning. A comprehensive range of steady testing and evaluation was also conducted as part...
متن کاملParameterization and Transient Validation of a Variable Geometry Turbocharger for Mean-Value Modeling at Low and Medium Speed-Load Points
The parameterization of variable geometry turbochargers for mean-value modeling is typically based on compressor and turbine flow and efficiency maps provided by the supplier. At low turbocharger speeds, and hence low airflows, the heat exchange via the turbocharger housing affects the temperature-based measurements of the efficiencies. Therefore, the lowspeed operating regime of the turbocharg...
متن کاملTurbocharger Design and Performance Analysis
Performance testing identifies many aspects of turbocharger performance. Although, when performance is less than satisfactory, test cell mapping only identifies secondary or tertiary troubles demonstrating inconsistencies with expected performance. Such tasks as seeking out and eliminating efficiency losses or increasing operational surge margin are unrealistic expectations when basing your con...
متن کاملPerformance Analysis of Object Detection Using Modified Statistical Mean Method
Moving object detection is low-level, important task for any visual surveillance system. One of the aim of this project is to, to describe various approaches of moving object detection such as background subtraction, temporal difference. A statistical mean technique is used to overcome the problem in previous techniques. We propose a modified statistical mean technique with noise removing proce...
متن کاملbuckling of viscoelastic composite plates using the finite strip method
در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....
منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 1 شماره 1
صفحات 47- 55
تاریخ انتشار 2011-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
کلمات کلیدی برای این مقاله ارائه نشده است
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023