Numerical study of soil dynamic compaction using ABAQUS model
نویسندگان
چکیده مقاله:
One of the most important methods of soil compaction is dynamic compaction, which is one of the oldest and economical methods of soil improvement up to great depths. This method is applied due to its many benefits, including its economic procedure to correct many kinds of soil. One of the most important issues that affect soil improvement methods is being economic. The three main methods of using piles, chemical modification, use of Menard density and vibrating tools are used for soil compaction at the time of presentation of an improvement project. The Menard method due to its much lower cost is more widely used than other methods. Considering the importance of the economy factor in the country's development projects, the need for 3D simulation and the ability of ABAQUS software to deliver the results of this research to a numerical model that can be used in civil engineering projects is becoming more important. The purpose of this paper was to evaluate the numerical modeling of dynamic compaction using finite element method and using ABAQUS software to improve the foundation by changing to height and weight of the compactor through Menard method for three cities of Ahvaz, Abadan, and Mahshahr. The results showed that the increase in the height of the fall resulted in an increase in the depth of the impact for all three categories with different weights of compactor. In addition, the depth difference was less affected in the high weights, which shows that the only weight increase of the compactor cannot be a factor in increasing the effect of soil compaction.
منابع مشابه
Numerical simulation of dynamic soil compaction with vibratory compaction equipment
Roller drums make use of various shapes and their dynamic compaction effect is achieved by different kinds of dynamic excitation systems. The bearing capacity of layered soil constructions can be measured during the soil compaction process. The finite element method has been applied for dynamic analyses using elastic models. For the realistic simulation of the dynamic compaction process it is n...
متن کاملAnalysis of Reinforced and Un - reinforced Soil Slopes using Abaqus
Assessing the strength of soil slopes and investigating the means for increasing their safety against failure are crucial in construction projects involving large soil masses. Slope stability analyses have traditionally been performed using a limit state approach. However, any presence of reinforcement or local heterogeneity necessitates the use of numerical techniques such as finite element an...
متن کاملNumerical Modelling of Dynamic Compaction in Dry Sandy Soils for Determination of Effective Print Spacing
Dynamic compaction (DC) is a widely used soil improvement method in dry and/or saturated soils. The design of DC treatment is usually carried out based on the past experiences and empirical relations. In order to clarify the ambiguities in DC processes, numerical modeling of DC in dry granular soils has been considered using a dynamic finite element code. Using the developed model, two design c...
متن کاملHigh-performance Abaqus simulations in soil mechanics
Abaqus is often applied to solve geomechanical boundary value problems. Several Abaqus built-in features enable a wide range of simulating such problems. For complex problems Abaqus can be extended via user subroutines. Several extensions for soil mechanics purposes are discussed and corresponding case studies are presented.
متن کاملNumerical modeling of dynamic powder compaction using the Kawakita equation of state
Dynamic powder compaction is analyzed using the assumption that the powder behaves, while it is being compacted, like a hydrodynamic fluid in which deviatoric stress and heat conduction effects can be ignored throughout the process. This enables techniques of computational fluid dynamics such the equilibrium flux method to be used as a modeling tool. The equation of state of the powder under co...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 7 شماره 18
صفحات 19- 32
تاریخ انتشار 2018-04-10
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023