Numerical Study of Progressive Collapse in Framed Structures: A New Approach for Dynamic Column Removal (TECHNICAL NOTE)

نویسنده

چکیده مقاله:

Progressive collapse is a situation where local failure of a primary structural component leads to the collapse of adjoining members which, in turn, leads to additional collapse. Hence, the total damage is disproportionate to the original cause. The most common local failure in framed structure is assumed to be column failure. In this paper, a new approach for dynamic column removal in framed structures was proposed. Using this approach, the structural response of the 5-story steel building under the sudden loss of columns for different scenarios of column removal was assessed. Both material and geometric nonlinearities are taken into account in the analysis. The modeling techniques were described in details. Special emphasis is focused on the evolution of vertical displacements of column removal point. According to results progressive collapse potential are strongly dependent on location of column loss. It could be concluded that the proposed approach offers the advantages of computational simplicity and practicality for dynamic column removal of framed structures.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Numerical Study of Progressive Collapse in Intermediate Moment Resisting Reinforced Concrete Frame Due to Column Removal

Progressive collapse is a chain reaction of failures propagating throughout a portion of the structure disproportionate to the original local failure occurring when a sudden loss of a critical load‐bearing element initiates a structural element failure, eventually resulting in partial or full collapse of the structure. Both General Services Administration (GSA) and United States Department of D...

متن کامل

Threat-Independent Column Removal and Fire-Induced Progressive Collapse: Numerical Study and Comparison

Progressive collapse is defined as the spread of an initial failure from element to element, eventually resulting in the collapse of an entire structure or a disproportionately large part of it. The current progressive collapse analyses and design methods in guidelines and codes focus on the alternate load path method. This method is suitable especially in the case of blast-induced progressive ...

متن کامل

Parametric study of the progressive collapse of 2D framed structures

In this paper we study the response of 2D framed structures made of reinforced concrete to the sudden removal of columns. For comparative reasons, the 2D frames are considered as part of 3D structures with same overall structural mass and external load potential. In particular, we study two sets of 2D frames, with different height-bay ratio λ of the structural cells. Each set counts 3 frames wi...

متن کامل

numerical study of progressive collapse in intermediate moment resisting reinforced concrete frame due to column removal

progressive collapse is a chain reaction of failures propagating throughout a portion of the structure disproportionate to the original local failure occurring when a sudden loss of a critical load‐bearing element initiates a structural element failure, eventually resulting in partial or full collapse of the structure. both general services administration (gsa) and united states department of d...

متن کامل

Numerical Evaluation of Progressive Collapse Potential in Reinforced Concrete Buildings with Various Floor Plans Due to Single Column Removal

Progressive collapse is defined as the spread of an initial damage from one member to another, leading to extensive partial or total collapse of the structure. In this research, the potential of progressive collapse due to a sudden removal of vertical load-bearing elements in reinforced concrete buildings structures with different floor plans such as geometrical regular and irregular floor plan...

متن کامل

Numerical Modelling of the Progressive Collapse of Framed Structures as a Result of Impact or Explosion

A definition of progressive collapse is offered and two examples of the phenomenon described. Attention is drawn to potential sources of abnormal loads that should be examined when designing for progressive collapse performance. A plane frame computer program is described for the collapse analysis of reinforced concrete frames using finite elements and a quasi-static approach. The paper conclud...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 26  شماره 7

صفحات  685- 692

تاریخ انتشار 2013-07-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023