Numerical Simulation of Impact of Low Velocity Projectiles With Water Surface

نویسندگان

  • N. Dashtian Gerami Ph D Student, Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran
  • N. Khazraiyan Ph D Student, Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran
چکیده مقاله:

In this article, Finite Element Method (FEM) and Eulerian-Lagrangies Algorithm (ELA) formulation were used to numerically simulate the impact of several low-velocity projectiles with water surface. Material models which were used to express behavior of air and water included Null material model. For the projectiles, rigid material model were applied. Results were validated by analyzing the impact of metallic cylinder with a water surface and then the impact of a wedge, sphere and special projectile at low-velocities were simulated. Major outputs were force and pressure applied to the projectile, variations of velocity and acceleration when entering to the water, stress-strain variations and variations of water surface in various steps of the analysis. Results showed that the impact of the structure with fluid can be modeled using finite element model with high accuracy in terms of quality and quantity.Numerical results obtained for cylinder well agrees with the available experimental data. Also the results for other projectiles show a logical trend

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

numerical simulation of fluid-structure interaction and its application in impact of low-velocity projectiles with water surface

in this article, finite element method and ale formulation were used to numerically simulate impact of low-velocity specific projectiles with water surface. for the simulation, ls-dyna finite element code was used. material models which were used to express behavior of air and water included null material model. for the projectile, plastic-kinematics material model was applied. mie-gruneisen eq...

متن کامل

Numerical analysis of low velocity impact on ceramic-metal-composite targets

In the present paper, the problem of low velocity impact of plates made from different configurations of ceramic, aluminum, steel and composite (S-glass polyester) is analyzed numerically using  Abaqus finite element software. The projectile is assumed to be a rigid body with a hemispherical head. Also, for ceramic layers, Holmquist constitutive model, for aluminum and steel layers, Johnson Coo...

متن کامل

Viscous Models Comparison in Water Impact of Twin 2D Falling Wedges Simulation by Different Numerical Solvers

In this paper, symmetric water entry of twin wedges is investigated for deadrise angle of 30 degree. Three numerical simulation of a symmetric impact, considering rigid body dynamic equations of motion in two-phase flow is presented. The two-phase flow around the wedges is solved by Finite Element based on Finite Volume method (FEM-FVM) which is used in conjunction with Volume of Fluid (VOF) sc...

متن کامل

A Numerical Study on Aluminum Plate Response under Low Velocity Impact

In the present paper, a numerical study is performed to investigate the response of different plates aluminum alloys subjected to low velocity impact condition. In this regard, the square AA5083-H116 aluminum plates with dimensions 300×300 and 3 mm and 5 mm thick under low velocity impact are modelled, and a mesh convergence study is carried out to decide the appropriate number of elements. In ...

متن کامل

Numerical simulation of water entry of tunnel cross section with different deadrise angles and tunnel radiuses

This study deals with the numerical modeling of symmetrical water entry of tunneled sections. In this study, firstly, the water entry problem of a wedge section without tunnel in four different deadrise angles was numerically modeled. The obtained results related to the pressure distribution on these sections and the maximum pressure have been compared with the experiment results. In the next s...

متن کامل

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 8  شماره 2

صفحات  117- 136

تاریخ انتشار 2015-08-23

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023