Numerical investigation of effective harbor geometry parameters on sedimentation inside square harbors

نویسندگان

  • K. Hejazi K.N.Toosi University of Technology
  • M. Karimi K.N.Toosi University of Technology
چکیده مقاله:

Sedimentation is one of the most important problems in harbors that results in considerable economic costs. Harbor planforms affects the flow pattern in the harbor basin and consequently, plays an important role in sediment transport and sedimentation. In the present study, a two dimensional depth-averaged hydrodynamic and sediment transport model has been developed to investigate the effect of harbor planform on sedimentation and sediment transport in harbor basin. Various planforms have been examined by the numerical model and results are plotted for alternative harbor planform geometry parameters, namely, planform aspect ratio, entrance location and entrance width which are presented in a dimensionless form. Results suggest that planform aspect ratios less than unity, leads to less sedimentation Inside the harbor basin. In addition, it can be observed that, while entrance location dose not seriously affect suspended sediment transport rate through the harbor entrance, entrance locations closer to the corner of the basin lead to less sedimentation.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

numerical investigation of effective harbor geometry parameters on sedimentation inside square harbors

sedimentation is one of the most important problems in harbors that results in considerable economic costs. harbor planforms affects the flow pattern in the harbor basin and consequently, plays an important role in sediment transport and sedimentation. in the present study, a two dimensional depth-averaged hydrodynamic and sediment transport model has been developed to investigate the effect of...

متن کامل

investigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem

در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...

Numerical Investigation of Effective Parameters on Efficiency of Solar Chimney

The environmental pollution crisis caused by the excessive use of fossil fuels and the risk of the destruction of natural resources and reserves, as well as the excessive production of greenhouse gases and, consequently, global warming, led many energy researchers to use renewable energy As a fossil fuel alternative. Solar chimneys are one of the types of renewable energies that have been taken...

متن کامل

Numerical Investigation of Hydraulic Characteristics Effective on Vertical Drop

The drops are used to control the descents,  stabilize the bed level, and control the upstream water level in sloping channels with less slope than the ground slope. The current study presents a numerical analysis of hydraulic characteristics in the vertical drop using computational fluid dynamics. At first, the laboratory models were used for verification and choosing the best model of turbule...

متن کامل

Numerical Investigation of the Effect of Stenosis Geometry on the Coronary Diagnostic Parameters

The present study deals with the functional severity of a coronary artery stenosis assessed by the fractional flow reserve (FFR). The effects of different geometrical shapes of lesion on the diagnostic parameters are unknown. In this study, 3D computational simulation of blood flow in three different geometrical shapes of stenosis (triangular, elliptical, and trapezium) is considered in steady ...

متن کامل

Numerical Simulation of Flow inside the Square Cavity

Numerical simulations have been undertaken for the benchmark problem in a Square cavity by using computational fluid dynamics software. This work aims at discussing the fundamental numerical and computational fluid dynamic aspects which can lead to the definition of the following meshing methods and turbulence models. The meshes used for the simulation are hexahedral, hexahedral cell with near ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 3  شماره 2

صفحات  57- 68

تاریخ انتشار 2013-06-20

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023