Nonlinear and Non-stationary Vibration Analysis for Mechanical Fault Detection by Using EMD-FFT Method

نویسندگان

چکیده مقاله:

The Hilbert-Huang transform (HHT) is a powerful method for nonlinear and non-stationary vibrations analysis. This approach consists of two basic parts of empirical mode decomposition (EMD) and Hilbert spectral analysis (HSA). To achieve the reliable results, Bedrosian and Nuttall theorems should be satisfied. Otherwise, the phase and amplitude functions are mixed together and consequently, the confidence of resultant frequencies are reduced. To prevent such an event, various methods as improved Hilbert-Huang transforms have been proposed. Yet, another method is introduced in this paper that has a high ability to identify the mechanical defects easily. According to this method, the signal is decomposed to its intrinsic mode functions (IMFs) and then each of the IMF is analyzed by fast Fourier transform (FFT). As the proposed method, which is called EMD-FFT, used, the mechanical defects of an electro motor have been detected in Kerman combined power plant. While, the classical FFT method is unable to detect all the defects and the HHT, due to the mixing phase and amplitude functions, does not provide accurate results.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Method for Anomaly Detection for Non-stationary Vibration Signatures

Vibration signatures contain information regarding the health status of the machine components. One approach to assess the health of the components is to search systematically for a list of specific failure patterns, based on the physical specifications of the known components (e.g. the physical specifications of the bearings, the gearwheels or the shafts). It is possible to do so, since the ma...

متن کامل

Detection of Gear fault using vibration analysis

The new generation of condition monitoring and diagnostics systems differs by the detailed solution of diagnostic problems that allows making a step from machine vibration state monitoring to the monitoring of the machine technical condition. Most rotating machine defects can be detected by such a system much before dangerous situations occur. It allows the efficient use of stationary on-line c...

متن کامل

Nonlinear Vibration Analysis of the Composite Cable using Perturbation Method and the Green-Lagrangian Nonlinear Strain

In this study, nonlinear vibration of a composite cable is investigated by considering nonlinear stress-strain relations. The composite cable is composed of an aluminum wire as reinforcement and a rubber coating as matrix. The nonlinear governing equations of motion are derived about to an initial curve and based on the fundamentals of continuum mechanics and the nonlinear Green-Lagrangian stra...

متن کامل

Application of the method of multiple scales for nonlinear vibration analysis of mechanical systems with dry and lubricated clearance joints

In this study, the method of multiple scales is used to perform a nonlinear vibration analysis of a mechanical system in two cases; with dry and lubricated clearance joints. In the dry contact case, the Lankarani-Nikravesh model is used to represent the contact force between the joined bodies. The surface elasticity is modeled as a nonlinear spring-damper element. Primary resonance is discussed...

متن کامل

Fault Detection Method on a Compressor Rotor Using the Phase Variation of the Vibration Signal

The aim of this work is the application of the phase variation in vibration signal for fault detection on rotating machines. The vibration signal from the machine is modulated in amplitude and phase around a carrier frequency. The modulating signal in phase is determined after the Hilbert transform and is used, with the Fast Fourier Transform, to extract the harmonics spectrum in phase. This me...

متن کامل

Thermo-mechanical nonlinear vibration analysis of fluid-conveying structures subjected to different boundary conditions using Galerkin-Newton-Harmonic balancing method

The development of mathematical models for describing the dynamic behaviours of fluid conveying pipes, micro-pipes and nanotubes under the influence of some thermo-mechanical parameters results into nonlinear equations that are very difficult to solve analytically. In cases where the exact analytical solutions are presented either in implicit or explicit forms, high skills and rigorous mathemat...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 25  شماره 4

صفحات  363- 372

تاریخ انتشار 2012-12-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023