New Achievements in Fe3O4 Nanofluid Fully Developed Forced Convection Heat Transfer under the Effect of a Magnetic Field: An Experimental Study
نویسندگان
چکیده مقاله:
Fe3O4 nanofluid fully developed forced convection inside a copper tube is empirically investigated under the effect of a magnetic field. All of the investigations are performed under laminar flow regime (670≤Re≤1700) and thermal boundary conditions of the tube with uniform thermal flux. The tube is under the effect of a magnetic field in certain points. This research aims to study the effect of various parameters, namely use of nanofluid, nanoparticles volume percent, Reynolds number of the flow, constant magnetic field, and alternating magnetic field with various frequencies on flow behavior. To validate the experiment set-up, distilled water is utilized as working fluid. The results are compared with Shah’s equation and acceptable agreements are achieved. The results suggest that owing to complex convectional flows developed in the fluid as a result of Fe3O4 nanoparticles-magnetic field interaction, increased alternating frequency of the magnetic field and increased volume fraction lead to increase heat transfer to maximum value 4.62. As Reynolds number increases, the rate of the said increase is reduced and reached to 0.29. At a constant Reynolds number, increased frequency of the alternating magnetic field results in an increased local heat transfer coefficient. However, this increase is unproportional to increase in frequency. In high frequencies, increased frequency leads to a slight increase in the heat transfer coefficient.
منابع مشابه
Heat Transfer Study of Perforated Fin under Forced Convection
Fins are protrusions on a heat transfer surface to augment heat transfer rate from it. The increase in area exposed to convection in case of finned surfaces results in increased heat transfer rate. In this study heat transfer characteristics of a pin fin with perforation is numerically analyzed. A pin fin is fabricated and experiments are done under forced convection conditions. The experimenta...
متن کاملAn Experimental Study of Heat Transfer During Forced Air Convection
Cast aluminum alloys are usually subject to solution treatment, quenching, and aging hardening for improved mechanical properties. Cooling rate during quenching plays an important role in residual stress, distortion, and mechanical property distributions in the resultant cast aluminum components. As the cooling rates of work pieces heavily depend on the interfacial heat transfer coefficient (HT...
متن کاملEffect of Magnetic Field on Heat Transfer of Nanofluid with Variable Properties on the Inclined Enclosure
The purpose of this study is to investigate the effect of magnetic field on the fluid flow and natural convection of CuO-water nanofluids with variable properties in an inclined square enclosure. The horizontal walls of cavity are insulated, the left sidewall assumed as hot wall and the right sidewall assumed as cold wall. Effects of Rayleigh numbers 103, 104, 105</su...
متن کاملAnalysis of variance of nanofluid heat transfer data for forced convection in horizontal spirally coiled tubes
In the present study, an experimental study is carried out to investigate the effect of adding Al and Cu nanoparticles to the base fluid (water) on the heat transfer rate in a spirally coiled tube. The spirally coiled tube is fabricated from the straight copper tube with the inner and outer coil diameters of 100 and 420 mm, respectively. The experiments have been done for water and two types of...
متن کاملExperimental Investigation of Force Convection Heat Transfer in a Car Radiator Filled with SiO2-Water Nanofluid
In this study, effect of adding in SiO2 nanoparticle in base fluid (water) in car radiator is investigated experimentally. Radiators are compact heat exchangers that optimized and evaluated by considering different working conditions. Car\'s cooling system, plays an important role in vehicle\'s performance, consists of two main parts, known as radiator and fan. Radiators are compact heat exchan...
متن کاملEntropy generation calculation for laminar fully developed forced flow and heat transfer of nanofluids inside annuli
In this paper, second law analysis for calculations of the entropy generation due to the flow andheat transfer of water-Al2O3 and ethylene glycol-Al2O3 nanofluids inside annuli is presented. Thephysical properties of the nanofluids are calculated using empirical correlations. Constant heatfluxes at inner surface of the annuli are considered and fully developed condition for fluid flowand heat t...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 4 شماره 1
صفحات 1- 11
تاریخ انتشار 2017-04-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023