Natural radioactivity in ceramic tiles and associated radiological hazards
نویسندگان
چکیده مقاله:
Background: The natural radioactivity levels in ceramic tiles produced in Turkey were determined and the related radiological hazards were assessed. Materials and Methods: The natural radioactivity levels (226Ra, 232Th and 40K) in the ceramic tiles were measured using high-purity germanium detector system (HPGe) and the related radiological hazards were assessed by radium equivalent activity (Raeq), external hazard index (Hex), representative level index (Iγ), absorbed dose rate (D) and annual effective dose (AED). Results: The average activity concentrations of 226Ra, 232Th and 40K radionuclides in the ceramic tiles were found to be 36.59 ± 2.64, 51.23 ± 2.81 and 420.81 ± 12.87 Bq/kg, respectively. These values are less than the world average values except the activity values of 232Th. Again, the averages of radiological hazard parameters (Raeq, Hex, D and AED) found for all ceramic tiles were found lower than the world averages. Conclusion: The present results was compared with the literature and the international reference values. This study shows that the investigated ceramic tiles can be used safely in constructions and do not create significant radiological hazard when used in constructions.
منابع مشابه
Comparative assessment of natural radioactivity and radiological hazards in building tiles and sharp sand sourced locally and those imported from China and India
Background: Thirteen (13) types of building tiles and Sharp sand commonly used for building purposes were collected for their radionuclide contents analysis. Both imported and locally produced building tiles were examined. Materials and Methods: The samples of tiles and sand were crushed to powder and they were prepared such that their content could be examined by the use of gamma-ray spectrom...
متن کاملNATURAL RADIOACTIVITY (Ra, Th AND K) AND ASSESSMENT OF RADIOLOGICAL HAZARDS IN THE KESTANBOL GRANITOID, TURKEY
The surveys of natural gamma-emitting radionuclides in rocks and soils from the Ezine plutonic area were conducted during 2007. Direct dose measurement using a survey meter was carried out simultaneously. The present study, which is part of the survey, analysed the activity concentrations of U, Th and K in granitoid samples from all over the region by HPGe gamma spectrometry. The activity conce...
متن کاملAssessment of the natural radioactivity and its radiological hazards in some Egyptian rock phosphates
Radioactivity of terrestrial radionuclides Ra, Th and K in phosphate rock samples has been measured using gamma ray spectrometry system with an HPGe detector. The samples showed fairly high mean concentrations, 410±39 Bq.kg of Ra, 7.9±0.95 of Th and 37.6±4 of K. Mean absorbed gamma dose rate of 181.9±20 nGy.h was measured in air. Assessment of radiological hazards was made by calculating radium...
متن کاملMeasurement of Natural Radioactivity and Assessment of Associated Radiation Hazards in Soil Samples
Introduction e knowledge of radionuclide distribution and radiation levels in the environment is important for assessing the effects of radiation exposure due to both terrestrial and cosmogenic sources. Terrestrial radiation is due to radioactive nuclides present in varying amounts in soils, building materials, water, rocks and atmosphere. Some of the radionuclides from these sources are trans...
متن کاملRadiological Hazard Resulting from Natural Radioactivity of Soil in East of Shazand Power Plant
Introduction: Nuclear radiation is potentially harmful to humans and soil contamination with radionuclides is the main source of human radiation exposure. These radionuclides can., enter to human body through the food chain. In this study, 34 soil samples were collected from between Arak city and Shazand Power Plant over 20 km length and analyzed. Materials and Methods: The specific activities ...
متن کاملGraphic Design for Ceramic Tiles
The development of a computer based design system for ceramic tiles forms part of a BriteEuram project aimed at providing automated quality control for ceramic tile production. The design system is expected to provide a priori information about each tile design to the quality control inspection stations. The differences between graphic design for paper and graphic design for ceramic are discuss...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 17 شماره 2
صفحات 245- 252
تاریخ انتشار 2019-04
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023