Mono-Mono-Mono and Bi-Bi-Bi three-layer graphene systems’ optical conductivity

نویسندگان: ثبت نشده
چکیده مقاله:

Investigating the longitudinal optical conductivity of graphene systems, which is the mostimportant property for opto-electronic devices, for three-layer graphene systems theoretically and numerically is the main purpose of this study. Each layer can be mono- or bi-layer graphene. Separation between layers has been denoted by d, selected to be about ten nanometers. The carrier densities in each layer can be tuned by changing gate voltage. In these two dimensional layered structures; the main contributions to the optical conductivity are from the intra- and inter-band transition channels in a same layer. In this paper the graphene structure is described primarily, and the three-layer graphene systems with composes of mono-mono-mono and bi-bi-bi has been defined. Using dielectric and electron density-density correlation tensors, the imaginary part of dielectric function for the three-layer graphene systems are calculated and optical conductivities are plotted as a function of photon energies in different broadening widths, for final stages.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Investigating the Longitudinal Optical Conductivity in Three-Layer Graphene Systems with Composes Mono-Bi-Bi and Bi-Mono-Bi and Bi-Bi-Mono

The longitudinal optical conductivity is the most important property for graphene-baseddevices. So investigating this property for spatially separated few-layer graphene systems analytically and numerically is the main purpose of our study. Each layer can be mono- or bi-layer graphene. The density-density correlation function has been screened by the dielectric function using the random p...

متن کامل

CVD Growth of Mono- and Bi-Layer Graphene from Ethanol

CVD on metal substrates has been provn effective in the synthesis of graphene. But before application in graphene electronics, the quality of the synthesized graphene needs to be improved. Therefore a reliable method to grow large-scale, highquality graphene is required. Besides, the mechanism of graphene growth is not fully understood. Here we report utilizing CVD to produce monoand bi-layer g...

متن کامل

Controllable atmospheric pressure growth of mono-layer, bi-layer and tri-layer graphene.

Here we report a three-step growth method for high-quality mono-layer, bi-layer and tri-layer graphene with coverage ~90% at atmospheric pressure. The growth temperature and gas flow rate have been found to be the key factors. This method would be of great importance for the large scale production of graphene with defined thickness.

متن کامل

Large homogeneous mono-/bi-layer graphene on 6H-SiC(0001) and buffer layer elimination

In this paper we discuss and review results of recent studies of epitaxial growth of graphene on silicon carbide. The presentation is focused on high quality, large and uniform layer graphene growth on the SiC(0001) surface and results of using different growth techniques and parameters are compared. This is an important subject because access to high quality graphene sheets on a suitable subst...

متن کامل

Comment on “First principles calculation of lattice thermal conductivity in mono- and bi-layer graphene” by B

In a recent preprint Kong et al, arXiv: 0902.0642v1 (2009) claimed to calculate the lattice thermal conductivity of single and bi-layer graphene „from first principles”. The main findings were that the Umklapp-limited thermal conductivity is only slightly higher than that of high-quality bulk graphite along the basal plane, and that it does not strongly depend on the number of atomic layers. He...

متن کامل

Biomechanical comparison between mono-, bi-, and tricuspid valve architectures.

BACKGROUND An understanding of the relationship between venous valve architecture and associated fluid and solid mechanical forces will undoubtedly advance prosthesis design and treatments. The objective of the current study was to compare three valve architectures (mono-, bi-, and tricuspid) and the implications of these designs on the fluid and solid mechanics of the valve leaflets. The hypot...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 8  شماره 1

صفحات  47- 52

تاریخ انتشار 2019-04-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023