Monitoring Pipe-Wall Corrosion Rate by Ultrasonic Technique
نویسندگان
چکیده مقاله:
thickness and corrosion/erosion rate. In this thesis, a combination of signal processing techniques are used to estimate the corrosion rate estimates based on MBE. Corrosion rate is estimated based on ultrasonic pipe wall thickness data is collected over a short period of time using MBE model. This technique is based on data collected from the speedometer applied for thinning and both indicate that they were able to estimate the rate of corrosion in short periods of time and with good accuracy.
منابع مشابه
monitoring of pipe-wall thickness and thinning rate by ultrasonic technique
an important issue in power generation and petrochemical industries is the monitoring of pipe wall thickness and corrosion/erosion rate. the pipes are usually subject to erosive and/or corrosive environments and any failure could be catastrophic. while periodic manual ultrasonic thickness measurement is the common practice in many industries, in certain cases, where higher accuracies are requir...
متن کاملHigh-temperature ultrasonic thickness monitoring for pipe thinning in a flow-accelerated corrosion proof test facility
In order to monitor the pipe thinning caused by flow-accelerated corrosion (FAC) that occurs in coolant piping systems, a shear horizontal ultrasonic pitch-catch waveguide technique was developed for accurate pipe wall thickness monitoring. A clamping device for dry coupling contact between the end of the waveguide and pipe surface was designed and fabricated. A computer program for multichanne...
متن کاملIn-Line Ultrasonic Monitoring for Sediments Stuck on Inner Wall of a Polyvinyl Chloride Pipe
This research verified the applicability and effectiveness of the ultrasonic monitoring of sediments stuck on the inner wall of polyvinyl chloride (PVC) pipes. For identifying the transmittance of acoustic energy and the speed of sound in the PVC material, the pulse-echo ultrasonic testing was conducted for PVC sheets of different thicknesses. To simulate the solidified sediment, the hot melt a...
متن کاملCorrosion Assessment of Offshore Oil Pipeline Based on Ultrasonic Technique
In this paper, an intelligent ultrasonic inspection device for offshore pipeline inspection and a corrosion assessment of offshore pipeline software are developed to inspect the damage state of Chinese pipelines. The main function of the inspection system is ultrasonic signal pre-processing, data acquisition, de-noising and data compression in real time. The system includes a micro-computer, tr...
متن کاملMonitoring of corrosion damage using high-frequency guided ultrasonic waves
Due to adverse environmental conditions corrosion can develop during the life cycle of industrial structures, e.g., offshore oil platforms, ships, and desalination plants. Both pitting corrosion and generalized corrosion leading to wall thickness loss can cause the degradation of the integrity and load bearing capacity of the structure. Structural health monitoring of corrosion damage in diffic...
متن کاملLamb Wave Tomography and Its Application in Pipe Erosion/corrosion Monitoring
number of NDE applications. To excite Lamb waves, Ultrasonic Lamb wave techniques are widely used in a mode conversion of bulk waves or photo acoustic excitation are often used. Both of these approaches suffer from the need for liquid couplant or ablation of materials to reach good signal to noise ratio. In this paper, we propose a novel technique that utilizes point source excitation and detec...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 4 شماره 15
صفحات 13- 23
تاریخ انتشار 2016-12-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023