Modeling of Heat Losses Within Combustion Chamber of Diesel Engines
نویسندگان
چکیده مقاله:
The cylinder working fluid mean temperature, rate of heat fluxes to combustion chamber and temperature distribution on combustion chamber surface will be calculated in this research. By simulating thermodynamic cycle of engine, temperature distribution of combustion chamber will be calculated by the Crank-Nicolson method. An implicit finite difference method was used in this code. Special treatments for piston movement and a grid transformation for describing the realistic piston bowl shape were designed and utilized. The results were compared with a finite element method and were verified to be accurate for simplified test problems. In addition, the method was applied to realistic problems of heat transfer in an Isuzu Diesel engine, and gave good agreement with available experimental.
منابع مشابه
Combustion Modeling for Modern Direct Injection Diesel Engines
In order to comply with stringent pollutant emissions regulations, a detailed analysis of the engine combustion and emission is required. In this field, computational tools like CFD and engine cycle simulation play a fundamental role. Therefore, the goal of the present work is to simulate a high speed DI diesel engine and study the combustion and major diesel engine emissions with more deta...
متن کاملprediction of ignition delay period in d.i diesel engines
a semi-empirical mathematical model for predicting physical part of ignition delay period in the combustion of direct - injection diesel engines with swirl is developed . this model based on a single droplet evaporation model . the governing equations , namely , equations of droplet motion , heat and mass transfer were solved simultaneously using a rung-kutta step by step unmerical method . the...
Study of Low-Temperature-Combustion Diesel Engines
Fuel cells have been recognized as a feasible alternative to current IC engines. A significant technical problem yet to be resolved is the on bound fuel supply before fuel cells can be practically used for vehicles. Use of an on-board fuel reformer can mitigate the fuel supply issue. In particular, using a diesel engine as on-board fuel reformer, combined with a fuel cell, is a strong candidate...
متن کاملcombustion modeling for modern direct injection diesel engines
in order to comply with stringent pollutant emissions regulations, a detailed analysis of the engine combustion and emission is required. in this field, computational tools like cfd and engine cycle simulation play a fundamental role. therefore, the goal of the present work is to simulate a high speed di diesel engine and study the combustion and major diesel engine emissions with more details,...
متن کاملCombustion Control of Diesel Engines Using Injection Timing
We propose a model-based control strategy to adapt the injection settings according to the airpath dynamics of a conventional Diesel engine. This approach complements existing airpath and fuelpath controllers, and aims at accurately controlling the middle of combustion. For that purpose, start of injection is adjusted based on a combustion model and intake manifold conditions. In particular, no...
متن کاملControl of highly diluted combustion in Diesel engines
In this paper, an open-loop control strategy to improve the stability of highly diluted Diesel combustion during sharp transients is proposed. The main advantage of this open-loop method is that no additional in-cylinder sensor is required. The approach coordinates existing airpath and fuelpath controllers, and aims at accurately controlling the end of the cool-flame phenomenon. For this purpos...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 17 شماره 3
صفحات 47- 52
تاریخ انتشار 2006-09
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023