Model identification and dynamic analysis of ship propulsion shaft lines

Dynamic analysis of three-cylinder engine with balancing shaft

Three-cylinder linear engines are designed to minimize, reduce fuel consumption and pollution. The disadvantages of this type of engine, heavy vibration inherent in them. this study aims to balance Three-cylinder linear engines with a balancing shaft. First, the dynamic analysis of these types of engines identifies unbalanced sources. The results of the dynamic analysis showed that the inertial...

Modeling of Ship Propulsion Performance

Full scale measurements of the propulsion power, ship speed, wind speed and direction, sea and air temperature, from four different loading conditions has been used to train a neural network for prediction of propulsion power. The network was able to predict the propulsion power with accuracy between 0.8-2.8%, which is about the same accuracy as for the measurements. The methods developed are i...

Exploring alternative methods of ship propulsion

Power Accounting for Ship Electric Propulsion

Coarse and accurate power accounting methods for ship electric propulsion are observed and compared. For the purpose of analysis, the propulsion system has been separated into two units, namely the ship load and the motor drive. In the load model, variation of such factors like static and dynamic hull resistance and efficiency is explored while the supply characteristics, drive loading, propell...

hydrodynamic performance of the modern ship propulsion system

this paper presents numerical calculations for podded propulsion system using vortex theory and potential panel method. the method discretizes the surface boundary of the body (propeller +pod+strut) and obtained the vortex and propeller surface and potential on strut and pod. a model propeller and strut are considered for these calculations and the results of pressure distribution, flow field a...

petrology and geochemistry of khar-bash (western shahrood) and its relation ship to iron mineralization

منطقه مورد مطالعه در 23 کیلومتری جنوب غرب شهرستاشاهرود قرار دارد که در نقشه 100000/1 شاهرود قرار گرفته است.ناحیه مورد مطالعه در تقسیمات ساختاری ایران بخشی از زون البرز شرقی است . در طی سنوزوئیک این زون به شدت تحت تأثیر فازهای کوهزایی آلپی قرار گرفته و فعالیت های آتشفشانی انوسن در قسمت های غربی آن دیده می شود . از نظر ترکیب سنگ شناسی منطقه مورد مطالعه متنوع و بیشتر شامل سنگ های رسوبی مانند : آ...