Modal Characteristics of Composite Beams with Single Delamination- A Simple Analytical Technique

نویسندگان

  • Keyvan Torabi Department of Mechanical Engineering, University of Kashan, Kashan, 87317-51167, Iran
  • Mohammad Heidari-Rarani Department of Mechanical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, 81746-73441, Iran
چکیده مقاله:

In the present research, the effects of delamination size and location on vibration characteristics of laminated composite beams are investigated both analytically and numerically. In the analytical method, the delaminated beam is modeled as four interconnected Euler–Bernoulli beams and the constrained and free mode models are both simulated. The differential stretching and the bending-extension coupling are considered in the formulation. Analytical expressions for displacement functions are presented in a simple form based on the basic standard trigonometric and hyperbolic functions. This new technique considerably simplifies the calculations regardless of the number of delaminations. In finite element method, delaminated composite beams are modeled in commercial finite element software, ABAQUS, and natural frequencies and mode shapes are extracted from the modal analysis. Analytical results are compared with finite element ones and available experiments in the literature. Finally, the generated database for different sizes and locations of delamination can be used to detect the existence of delamination in laminated composite beams and thento specify the size and location of delamination.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

modal characteristics of composite beams with single delamination- a simple analytical technique

in the present research, the effects of delamination size and location on vibration characteristics of laminated composite beams are investigated both analytically and numerically. in the analytical method, the delaminated beam is modeled as four interconnected euler–bernoulli beams and the constrained and free mode models are both simulated. the differential stretching and the bending-extensio...

متن کامل

Compressive Behavior of a Glass/Epoxy Composite Laminates with Single Delamination

The buckling and postbuckling behaviors of a composite beam with single delamination are investigated. A three-dimensional finite element model using the commercial code ANSYS is employed for this purpose. The finite elements analyses have been performed using a linear buckling model based on the solution of the eigenvalues problem, and a non-linear one based on an incremental-iterative method....

متن کامل

Static Study of Piezoelectric Bimorph Beams with Delamination Zone

The FOSDT (the First Order Shear Deformation Theory) is taking into consideration to study the static behavior of a bimorph beam, with a delamination zone between the upper and the lower layer. The effect of limit conditions and lengths of the delamination zone are presented in this paper, with a PVDF piezoelectric material application. A FEM “Finite Element Method” is used to discretize the be...

متن کامل

Experimental Investigation of the Dynamic Characteristics of Laminated Composite Beams

The laminated composite beams are basic structural components used in a variety of engineering structures such as airplane wings, helicopter blades and turbine blades as well as many others in the aerospace, mechanical, and civil industries. An important element in the dynamic analysis of composite beams is the computation of their natural frequencies and mode shapes. This is important because ...

متن کامل

An Analytical Technique for Solving Nonlinear Oscillators of the Motion of a Rigid Rod Rocking Bock and Tapered Beams

In this paper, a new analytical approach has been presented for solving strongly nonlinear oscillator problems. Iteration perturbation method leads us to high accurate solution. Two different high nonlinear examples are also presented to show the application and accuracy of the presented method. The results are compared with analytical methods and with the numerical solution using Runge-Kutta m...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 1  شماره 2

صفحات  97- 106

تاریخ انتشار 2014-11-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023