Microencapsulation of Orange Oil by Complex Coacervation and its Release Behavior (REASEARCH NOTE)
نویسندگان
چکیده مقاله:
Microencapsulation of liquid orange oil as a common flavoring agent in food industries by complex coacervation in a gelatin – gum arabic polymeric wall system was studied. At a fixed ratio of 10% w/v as concentration of the materials used in this study, trend of changes of microencapsulation process variables using different wall polymeric contents along with varying levels of the core to wall ratio were investigated. Distribution pattern of the coacervate particle size showed that more than 70% of the particle with the average diameter of 9.68 mm were reasonably encapsulated in those treatments having core to wall ratio at the level of 1:1 and 1:2 while gelatin to gum arabic content of the wall system were set to be 1:1 and 2:1 ratio, respectively. The yield of the process as ratio of the amount of coacervate microcapsules produced to the amount of materials initially present in the emulsion was highest (69%) for the treatment described. Moreover, the release and swelling data have been analyzed in terms of the generalized equation Mt/M∞=ktn applicable for swellable controlled release systems. The results obtained were discussed on the basis of the release rate constant k, and diffusional exponent n.
منابع مشابه
Microencapsulation of thyme oil by coacervation.
The objective of this work is to develop a novel coacervation process to produce microcapsules of polylactide (PLA) to encapsulate thyme oil that will be used in cosmetics. The novelty of this approach consists of dissolving PLA in dimethylformamide (DMF) which is a good solvent for PLA but in addition has high solubility in water. Upon contact with water, the homogeneous solution of PLA in DMF...
متن کاملMicroencapsulation of Eugenol by Gelatin-Sodium Alginate Complex Coacervation
Present study describes microencapsulation of eugenol using gelatin-sodium alginate complex coacervation. The effects of core to coat ratio and drying method on properties of the eugenol microcapsules were investigated. The eugenol microcapsules were evaluated for surface characteristics, micromeritic properties, oil loading and encapsulation efficiency. Eugenol microcapsules possessed good flo...
متن کاملOptimisation of the microencapsulation of tuna oil in gelatin-sodium hexametaphosphate using complex coacervation.
The microencapsulation of tuna oil in gelatin-sodium hexametaphosphate (SHMP) using complex coacervation was optimised for the stabilisation of omega-3 oils, for use as a functional food ingredient. Firstly, oil stability was optimised by comparing the accelerated stability of tuna oil in the presence of various commercial antioxidants, using a Rancimat™. Then zeta-potential (mV), turbidity and...
متن کاملEffect of pH on Garlic Oil Encapsulation by Complex Coacervation
Coacervation is known to be true microencapsulation because the core material is completely surrounded by a continuous coating of wall material. Coacervation involves interaction between one or many hydrocolloids, particularly between oppositely charged protein and polysaccharide in the same reaction media [1]. The interaction relies on the charges carried by the biopolymers, pH of the coacerva...
متن کاملEncapsulation of Peppermint Oil with Arabic Gum-gelatin by Complex Coacervation Method
The gelatin/gum Arabic microcapsules encapsulating peppermint oil were prepared by complex coacervation using tannic acid as hardening agent. The effects of various parameters, including concentration of wall material, core material, tannic acid and tween80 were investigated on particle size and encapsulation efficiency. For statistical evaluation of the parameters, Taguchi method has been used...
متن کاملInfluence of emulsion properties on the microencapsulation of orange essential oil by spray drying
This work aimed to study the effect of emulsion properties on the microencapsulation of orange essential oil by spray drying. The study was performed using a 2 central composite design, where the independent variables were the total solid content (0-30%), the ratio of oil/total solids (0-30%) and the homogenization pressure used for emulsification (0-1000 bar). Whey protein concentrate and 20 D...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 17 شماره 4
صفحات 333- 342
تاریخ انتشار 2004-12-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023