Light promoted synthesis of 1,8-dioxooctahydroxanthenes using sulphated tin oxide as solid support catalyst

نویسندگان

  • Pramod Kulkarni Department of Chemistry Hutatma Rajguru Mahavidyalaya Rajgurunagar, Pune 410505 MS India
  • Pudukulatham Zubaidha School of Chemical Sciences Swami Ramanand Teerth Marathwada University Nanded 431606 MS India
  • Tabassum Siddiqui School of Chemical Sciences Swami Ramanand Teerth Marathwada University Nanded 431606 MS India
چکیده مقاله:

In the past few years multi component reactions have captured the attention of synthetic chemists as they provide  easy  access  to diverse  complex  organic molecules through  carbon -  carbon   and  carbon - heteroatom  bond  formations  in tandem manner with simple easy  to carry out  reaction  conditions in short  time. 1,8-dioxo-octahydroxanthene is a significant class of oxygen containing heterocycle in which  a phenyl substituted pyran ring is fused on either side with two cyclohexanone rings and this unit constitutes in a number of natural products  with wide range of therapeutic and pharmacological properties. The present paper describes house hold 100 watt bulb promoted   multicomponent reaction between dimedone and various substituted cinnamaldehydes/ substituted benzaldehydes to afford  the corresponding 1,8-dioxo-octahydroxanthene derivatives using sulphated tinoxide as solid supported catalyst. This green procedure using heterogenous catalyst and light  as  source of energy  provides facile access to a variety of 1,8-dioxo- octahydroxanthene derivatives in good to excellent yield.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Optimization of Preparation Factors for Cerium Oxide Synthesis as a Support for CO PrOx Catalyst

Nanocrystalline ceria has been considered as support for carbon monoxide preferentially oxidation. In this study ceria was prepared by precipitation method and the effects of preparation conditions, such as pH of solution (8-10), aging time (1-12 hr), drying temperature (80-120 °C), calcination time (2-6 hr) and temperature (400-600 °C) were investigated on ceria synthesized powders properties....

متن کامل

Synthesis and characterization of linear polylactic acid-based urethanes using Tin modified solid cloisite-30B catalyst

In recent year, biocompatible, biodegradable materials (linear polylactic acid-based urethanes) in the solid and/or liquid form have attracted tremendous attention in biomedical application particularly in stent coating. Low molecular weight poly (lactic acid) s (PLA), having narrow molecular weight distribution was by dehydropolycondensation method using tetraphenyltin as a catalyst. Hydroxyl ...

متن کامل

Continuous Synthesis of Oleyl Oleate in Supercritical Carbon Dioxide using Solid p-Toluenesulfonic Acid as Catalyst

Supercritical carbon dioxide (SC-CO2) was used as solvent to synthesize oleyl oleate as an analog of Jojoba oil from oleic acid and oleyl alcohol with high conversion (100%) of the acid into ester in a short time of 100 min. Utilizing a low cost solid catalyst, p-toluenesulfonic acid monohydrate (PTSA), the esterification reaction was performed, without any prior preparation step...

متن کامل

single-step synthesis of multi-component spirobarbiturates using ionic liquids and synthesis of substituted pyridine filled with catalysts supported on solid substrate

in this thesis, a better reaction conditions for the synthesis of spirobarbiturates catalyzed by task-specific ionic liquid (2-hydroxy-n-(2-hydroxyethyl)-n,n-dimethylethanaminium formate), calcium hypochlorite ca(ocl)2 or n-bromosuccinimide (nbs) in the presence of water at room temperature by ultrasonic technique is provided. the design and synthesis of spirocycles is a challenging task becaus...

15 صفحه اول

Electro-Optical Properties of Low-Temperature Growth Indium-tin-oxide Nanowires Using Polystyrene Spheres as Catalyst

Polystyrene sphere was chosen as a catalyst to fabricate indium-tin-oxide (ITO) nanowires (NWs) with a low-temperature (280-300 °C) electron-beam deposition process, bearing high purity. The ITO NWs with diameter of 20-50 nm and length of ~2 um were obtained. X-ray diffraction and high-resolution transmission electron microscope show high crystal quality. The transmittance is above 90 % at a wa...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 7  شماره 1

صفحات  47- 59

تاریخ انتشار 2017-10-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023