Investigation of Different Validation Parameters of Micro Gas Turbine for Range Extender Electric Truck
نویسندگان
چکیده مقاله:
Nowadays the demand for reducing pollutant emissions and fuel consumption have paved the way of developing more fuel-efficient power generation system for transportation sector. Micro gas turbine (MGT) system can be an alternative to internal combustion reciprocating engine due to its light-weight and less fuel consumption. In this paper, some major running and operating characteristics of MGT are evaluated for the validation of the system for range extender electric truck. First noise characteristic of the system are investigated, then performance at high ambient temperature and variation of electrical output with and without the use of air filtration are investigated. The noise characteristics of MGT are different from diesel engine. At lower rpm and lower operating temperature, the electrical output of the system increases rapidly. All the found results are either compared with other systems or validated by comparing with the data provided by the manufacturer where necessary. The emission characteristics of MGT are different from other reciprocating engines. With the increase of power output the emissions of MGT reduces significantly. Finally, some noise reduction methods are recommended.
منابع مشابه
Micro Gas Turbine Range Extender - Validation Techniques for Automotive Applications
A Micro Gas Turbine (MGT) can be considered as an alternative to the internal combustion engine as a range extender for electric vehicles. The MGT produces less raw exhaust gaseous emissions such as HC and CO in aerospace and static applications compared to the internal combustion engine. In addition, the MGT weight is less than an equivalent internal combustion engine and potentially can reduc...
متن کاملinvestigation of gassing behavior, electric and dielectric properties of different insulating fluids.
ترانسفورماتورهای قدرت از اجزای اصلی شبکه تامین انرژی الکتریکی می باشند که عملکرد قابل اطمینان ترانسفورماتورها یکی از فاکتورهای مهم و تعیین کننده در تامین انرژی الکتریکی محسوب می شود. در نتیجه بررسی و مانیتور عملکرد ترانسفورماتورها در شبکه و همچنین عیب یابی این ترانسفورماتورها غیرقابل اجتناب و ضروری می باشد. به طور کلی عایق های مایع در صنعت فشار قوی کاربردهای متفاوتی دارند که مهمترین وظیفه آنها...
15 صفحه اولinvestigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem
در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...
Thermodynamic Analysis and Statistical Investigation of Effective Parameters for Gas Turbine Cycle using the Response Surface Methodology
In this paper, the statistical analyses are presented to study the thermal efficiency and power output of gas turbine (GT) power plants. For analyzing gas turbine operation and performance, a novel approach is developed utilizing the response surface methodology (RSM) which is based on the central composite design (CCD) method. An attempt is made to study the effect of some operational factors ...
متن کاملdevelopment of different optical methods for determination of glucose using cadmium telluride quantum dots and silver nanoparticles
a simple, rapid and low-cost scanner spectroscopy method for the glucose determination by utilizing glucose oxidase and cdte/tga quantum dots as chromoionophore has been described. the detection was based on the combination of the glucose enzymatic reaction and the quenching effect of h2o2 on the cdte quantum dots (qds) photoluminescence.in this study glucose was determined by utilizing glucose...
development and implementation of an optimized control strategy for induction machine in an electric vehicle
in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...
15 صفحه اولمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 31 شماره 10
صفحات 1782- 1788
تاریخ انتشار 2018-10-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023