Investigation of arsenic removal parameters by a new nano-hybrid adsorbent produced from red mud and fly ash

نویسندگان

  • G. Bulut Mineral Processing Engineering Department, Faculty of Mining, Istanbul Technical University, Istanbul
  • U. Yenial Mineral Processing Engineering Department, Faculty of Mining, Istanbul Technical University, Istanbul
چکیده مقاله:

Two common waste materials, red mud and fly ash, were used to produce a new nano-hybrid adsorbent by heat treatment with alkali addition. The new zeolitic structure formation of the hybrid adsorbent was revealed using the BET surface area, XRD, and SEM analyses. This hybrid adsorbent was utilized to remove arsenic from synthetic and real waste waters by batch and column adsorption experiments. The parameters such as the pH, contact time, and effect of the co-existing ions were investigated. Slightly acidic media favored arsenic adsorption by the hybrid adsorbent, the same as the individual use of fly ash and red mud. The effects of ions such as Fe3+, Cu2+, Cl-, SO42-, and PO43- were investigated as the co-existing ions. It was found that arsenic adsorption increased with cationic ions and decreased with anionic ions according to their valance charge. The intra-particle diffusion model showed that adsorption took place at three different rates depending on time. The hybrid adsorbent was formed as a pellet and utilized in a column for treatment of arsenic containing real waste water. The hybrid adsorbent derived from mineral wastes was more successful than their individual usages.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Arsenic (V) removal from aqueous system using adsorbent developed from a high iron-containing fly ash.

A novel adsorbent for arsenic (V) removal from wastewater was developed through simple chemical processes using a special iron-abundant fly ash. In the synthesis process, the inherent iron in the fly ash was rearranged and loaded on the surface of the fly ash by dissolution and precipitation processes. The adsorbent (HIOFAA) was characterized by XRD, FT-IR, SEM, LPS and BET surface area. The re...

متن کامل

Photocatalytic removal of o-chlorophenol by Using a Mixture of Modified Fly Ash and TiO2 Nanoparticles

Abstract Background: Photocatalytic process is used as a suitable method for o-chlorophenol removal. In this study, the efficiency of a mixture of modified fly ash and TiO2 nanoparticles in photocatalytic removal of o-chlorophenol was evaluated. Methods: After acid washing of fly ash, the absorbent was oxidized with potassium permanganate. ...

متن کامل

Removal of Chromium (III) and Arsenic (III) by using Coal Ash as Adsorbent

The adsorption of Cr(III) and As(III) by using coal ash from thermal power plants in batch mode ,The effect of adsorbent agitation speed, dose, pH, contact time and agitation speed on the adsorption of Cr(III) and As(III) by coal ash is examined. Adsorption equilibrium was achieved in 50–55 min. The Langmuir, Temkin and Freundlich adsorption isotherms were used to observed sorption phenomena. T...

متن کامل

Removal of Cr(VI) from Wastewater using Fly ash as an Adsorbent

Cr(VI) is a highly toxic metal ion and considered a priority pollutant released from various chemical industries. Treatment methods to remove Cr(VI) from water and wastewater include chemical precipitation, ion exchange, membrane separation, electro-coagulation and reduction. These methods are not economically viable for large scale treatment of wastewater that is rich in Cr(VI). Adsorption is ...

متن کامل

investigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem

در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...

Coal Ash as a Low Cost Adsorbent for the Removal of Xylenol Orange from Aqueous Solution

The removal ofxylenol orange from aqueous solution onto the coal ash was investigated at room temperature. The results show that the adsorption capacity of xylenol orange increased as the adsorption time increased and then equilibrium established after 30 min adsorption time. The results obtained revealed that the coal ash removed about 80 % of xylenol orange from the aqueous solution withi...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 9  شماره 2

صفحات  319- 330

تاریخ انتشار 2018-04-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023