Influence of shielding gas composition on weld profile in pulsed Nd:YAG laser welding of low carbon steel

نویسندگان

  • F MalekGhaini Department of Materials Engineering, Tarbiat Modares University, Tehran, Iran
  • M J Torkamany Iranian National Center for Laser Science and Technology, Tehran, Iran
  • M Jokar Department of Materials Engineering, Tarbiat Modares University, Tehran, Iran
  • M Sheikhi Department of Materials Engineering, Tarbiat Modares University, Tehran, Iran
چکیده مقاله:

Weld area and weld depth/width ratio can be considered to be of the most important geometrical factors in pulsed laser welding. The effects of carbon dioxide and oxygen additions to the argon shielding gas on the weld properties in pulsed laser welding of low carbon steel is investigated. Presence of carbon dioxide and oxygen up to 10 and 15 percent respectively decreases the weld geometrical factors. But, at higher levels of additions, the weld geometrical factors will increase. It is observed that the plasma plume temperature decreases from 6000K to 5500K with the addition of 15% carbon dioxide but increases to 7700K with 25% carbon dioxide addition. Increase in laser absorption coefficient, laser energy absorption, formation of oxide layer on the work-piece surface, exothermic reactions and their competitive effects can be considered as the competing phenomena involved in such a behavior in the weld profile

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Influence of shielding gas composition on weld structure in pulsed Nd: YAG laser welding

This work studied the effect of additions of carbon dioxide to argon shielding gas on the weld shape and microstructure of ST14 steel in pulsed Nd: YAG laser welding. By additions of carbon dioxide up to 15%,the weld area and depth/width ratio decreases while rising of carbon dioxide up to 25% causes increasing of weld area and depth/width ratio. It is observed that the weld metal microstructur...

متن کامل

Simulation of effective parameters on low-carbon steel laser welding process using finite element method

In this paper, laser beam welding of a rectangular piece of steel was simulated using Fluent software. Physical properties of analytical field was constant and its changes with temperature was ignored. In the present work, effect of tool speed and laser power on temperature distribution of workpiece surface and different deeps in the plane of symmetry and also maximum of temperature and depth o...

متن کامل

Simulation of effective parameters on low-carbon steel laser welding process using finite element method

In this paper, laser beam welding of a rectangular piece of steel was simulated using Fluent software. Physical properties of analytical field was constant and its changes with temperature was ignored. In the present work, effect of tool speed and laser power on temperature distribution of workpiece surface and different deeps in the plane of symmetry and also maximum of temperature and depth o...

متن کامل

The effect of surface roughness on 1050 aluminum alloy weld profile welded by pulsed Nd:YAG laser

Surface roughness in the welding processes is one of the important parameters in the laser welded metal connections which affects laser beam absorption directly. When the laser beam is irradiated to the surface of the base metal, the surface roughness plays an important role in the amount of beam absorption and the amount of melting achieved and directly affects the penetration depth. The main ...

متن کامل

The effect of surface roughness on 1050 aluminum alloy weld profile welded by pulsed Nd:YAG laser

Surface roughness in the welding processes is one of the important parameters in the laser welded metal connections which affects laser beam absorption directly. When the laser beam is irradiated to the surface of the base metal, the surface roughness plays an important role in the amount of beam absorption and the amount of melting achieved and directly affects the penetration depth. The main ...

متن کامل

Influence of Shielding Gas on Fume and Gas Emission during Arc Weld Brazing of Steel Sheets with Coatings

J. Matusiak, J. Wyciślik, Institute of Welding, Gliwice, Poland The article presents the results of research into the fume and gas emission during MIG/MAG arc weld brazing. Investigations were conducted for hot dip coated steel sheets with zinc and zinc and iron alloy coatings. Steel grades of DX 54D Z 100 MBO and DX 54D ZF 100 RBO were used during research. ARC shielding gases applied were Ar ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 14  شماره 3

صفحات  41- 46

تاریخ انتشار 2014-12

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023