Increasing of tetragonal zirconia formation in the reaction sintering of alumina-zircon
نویسنده
چکیده مقاله:
In this study it was tried to investigate on the effective parameters of the formation and increasing tetragonal zirconia phase in reaction sintering of alumina and zircon. In this way, alumina and zircon powders were mixed by the ratio of 85 to 15 wt.% and sintered at different conditions. Sintering temperature (1500-1650˚C), furnace type (conventional and microwave) and the milling time of reactant (0.25, 1 and 3 h) were studied. Tetragonal zirconia phase was calculated and compared by semi quantitative analysis method using XRD. Also, porosity, microstructure and strength of the prepared composites were compared with each other. Results showed that increasing the milling time of reactant or using microwave heating were lead to the increasing of tetragonal zirconia formation but increasing the sintering temperature did not any significant effect on it.
منابع مشابه
Detection of tetragonal zirconia in alumina–zirconia powders by thermoluminescence
The thermoluminescence (TL) after excitation by UV or X-rays radiation of alumina-zirconia powders is investigated. The composites present five of the characteristic peaks of zirconia at −170, −145, −90, 0 and 95 °C. After a thermal treatment of mixed oxides, a new peak is observed at −35 °C in TL. This peak reveals the presence of stabilized tetragonal zirconia in the material. Moreover by com...
متن کاملاصلاحیه: بررسی اثر افزودن ایتریا بر خواص کامپوزیت های مولایت -زیرکونیا ساخته شده به روش ریخته گری دوغابی
In this study, the effect of different amounts of Y2O3 on the properties of mullite-zirconia composites was investigated. For this purpose, these composites were fabricated by reaction-sintering of alumina and zircon as raw materials. Besides, the slip casting method was used for forming these composites, and sintering process was carried out at 1600 °C. Then, the physical and mechanical pro...
متن کاملبررسی اثر افزودن ایتریا بر خواص کامپوزیت های مولایت-زیرکونیای ساخته شده به روش ریخته گری دوغابی
In this study, the effect of different amounts of Y2O3 on the properties of mullite-zirconia composites was investigated. For this purpose, these composites were fabricated by reaction-sintering of alumina and zircon as raw materials. Besides, the slip casting method was used for forming these composites, and sintering process was carried out at 1600 °C. Then, the physical and mechanical prope...
متن کاملThe Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite
Alumina-Mullite-Zirconia ceramic composites were prepared by reaction sintering of alumina, zircon mixture and the sintering aids of magnesia and titania at temperatures of 1400 and 1600 C for 2 hours. The development of different phases and microstructures of the composites were analysed to assess the relative influence of the additives on the formation of alumina-zirconia-mullite compos...
متن کاملformation and evolution of regional organizations: the case study of the economic cooperation organization (eco)
abstract because of the many geopolitical, geo economical and geo strategically potentials and communicational capabilities of eco region, members can expand the convergence and the integration in base of this organization that have important impact on members development and expanding peace in international and regional level. based on quality analyzing of library findings and experts interv...
15 صفحه اولمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 8 شماره 1
صفحات 51- 58
تاریخ انتشار 2019-05
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
کلمات کلیدی برای این مقاله ارائه نشده است
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023