Improving the Surface Quality using Combined Ultrasonic Vibration and Magnetic Abrasive Finishing Method

نویسندگان

  • A. Mohammadi Department of Mechanical Engineering, Yazd University, Yazd, IRAN
  • A.R. Fadaei Tehrani Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, IRAN
  • P. Mosadegh Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, IRAN
  • S. Khalaj Amineh Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, IRAN
چکیده مقاله:

In this paper, a new non-contact ultrasonic abrasive finishing mechanism is designed and fabricated. This mechanism combines the function of ultrasonic vibrations and the magnetic abrasive finishing (MAF) process. A permanent magnet which is mounted on a horn has been used as the processing tool. This polishing tool is vibrated at an ultrasonic frequency with piezo-electric actuators. Ultrasonic energy and the relative motion between magnet and the workpiece are the stimulus of the steel grit abrasives for improving the surface quality. In order to take advantage of the cavitation collapse pressure, the components is immersed in water.  The present work also studies the effect of parameters, i.e., finishing time and working gap on the surface roughness (Ra). 

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

improving the surface quality using combined ultrasonic vibration and magnetic abrasive finishing method

in this paper, a new non-contact ultrasonic abrasive finishing mechanism is designed and fabricated. this mechanism combines the function of ultrasonic vibrations and the magnetic abrasive finishing (maf) process. a permanent magnet which is mounted on a horn has been used as the processing tool. this polishing tool is vibrated at an ultrasonic frequency with piezo-electric actuators. ultrasoni...

متن کامل

Measurement and simulation of magnetic field strenght in the nano magnetic abrasive finishing process

Magnetic abrasive finishing can be classified as a non-traditional super finishing method for finishing surfaces with different shapes and working materials like flat plates, shafts, bearings parts, screws, tubes and many other mechanical parts that need good surface finishing properties. MAF is effective in polishing, cleaning, deburring and burnishing metal parts. The most important parameter...

متن کامل

Investigation of the Effective Parameters on Surface Roughness in Magnetic Abrasive Finishing Process Using Design of Experiments

In this article, the effect of parameters like working gap, work piece rotational speed and material removal mechanism(injection of the SiC Abrasive slurry and Al2O3, use of diamond paste as abrasive tool) in Magnetic Abrasive Finishing process using designing of experiments on the external surface of Cylindrical work pieces of Stainless steel AISI 440C to get minimum surf...

متن کامل

Investigation of the Effective Parameters on Surface Roughness in Magnetic Abrasive Finishing Process Using Design of Experiments

In this article, the effect of parameters like working gap, work piece rotational speed and material removal mechanism(injection of the SiC Abrasive slurry and Al2O3, use of diamond paste as abrasive tool) in Magnetic Abrasive Finishing process using designing of experiments on the external surface of Cylindrical work pieces of Stainless steel AISI 440C to get minimum surf...

متن کامل

Corrective Abrasive Finishing Processes for Freeform Surface

Traditionally, abrasive finishing process focus on producing excellent surface finish on regular form shapes. Ever increasing demands in freeform features in aerospace, energy and medicine industry requires abrasive finishing technology not only provides excellent surface finish but also is capable to correct the errors on freeform surfaces. The paper presents current development of corrective ...

متن کامل

Ultrasonic Cleaning and Surface Finishing

Careful preparation and cleaning of various types of components is indispensable prior to their surface treatment or final assembly. Various surface treatment operations that require such care include vacuum deposition, electrodeposition, electroless deposition, various dip coatings, etc. Surface preparation is essential for achieving good and firmly adhered coatings. Trace of residual surface ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 14  شماره 2

صفحات  37- 49

تاریخ انتشار 2013-09-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023