Grafting of Acrylamide to Low Density Polyethylene During Melt Processing

نویسندگان

  • Faranak Naimian Gamma Irradiation Center, Atomic Energy Organization of Iran, P.O. Box 11365-8486, Tehran, I.R. IRAN
  • Nassrin Sheikh Gamma Irradiation Center, Atomic Energy Organization of Iran, P.O. Box 11365-8486, Tehran, I.R. IRAN
  • Rouhallah Bagheri Polymer Group, Faculty of Chemical Engineering, Isfahan University of Technology, Zip code 84154, Isfahan, I.R. IRAN
چکیده مقاله:

Acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. Effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. FTIR studies revealed that the degree of grafting increased by an increase in acrylamide concentration. Maximum grafting was obtained at 7 minutes processing time and 1% (wt/wt) peroxide. Increase in acrylamide concentration led to reduction in melt flow index and increase in apparent melt viscosity.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

grafting of acrylamide to low density polyethylene during melt processing

acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. ftir studies revealed that the degree of grafting increased by an increase in acrylamide concentration. maximum grafting was obtained at 7 minute...

متن کامل

Catalytic conversion of waste low density polyethylene into fuel oil

Waste Low density polyethylenes (LDPE) represent a source of energy and valuablechemicals, were pyrolysed catalytically in a batch reactor under atmospheric pressure. Calciumcarbide was used as a catalyst to explore its effect on pyrolysis product distribution. The effect oftemperature, amount of catalyst and time on the yields of the pyrolysed products wasinvestigated. The effect of catalyst o...

متن کامل

Melt Rheology of Poly(Lactic Acid)/Low Density Polyethylene Polymer Blends

In this work, rheological properties of poly(lactic acid) (PLA), low density polyethylene (LDPE) polymer blends were investigated in the molten state. The experiments were carried on a capillary rheometer. The effect of shear stress, temperature and blending ratio on the flow activation energy at a constant shear stress and melt viscosity of the blends are described. The results showed that the...

متن کامل

Effects of Thymolphthalein on Thermo-Oxidative Stability of High Density Polyethylene in Melt and Solid States

The present work aimed to evaluate capability of a new molecular structure to stabilize polyethylene against thermal oxidation. Hence, effects of 3,3-bis(4-hydroxy-2-methyl-5-propan-2-ylphenyl)-2-benzofuran-1-one (thymolphthalein) on thermo-oxidative stability of high density polyethylene (HDPE) in both solid and melt states were investigated and compared with those of SONGNOX 1010, a comme...

متن کامل

Oxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer

In this research, high oxygen-barrier films were organized based on low-density polyethylene (LDPE)/ ethylene vinyl alcohol (EVOH)/ polyethylene-grafted maleic anhydride (LDPE-g-MA) compatibilizer. The effects of 10–30 wt. % EVOH and 0–10 wt. % LDPE-g-MA loadings on the properties of final films were evaluated. The morphology of specimens was observed by using scanning electron microscopy (SEM)...

متن کامل

Comparison of grafting of maleic anhydride onto linear low density polyethylene with hexene-1 and butene-1 comonomers and prediction of optimum ingredients by response surface methodology

In this work, the grafting of maleic anhydride onto two types of linear low density polyethylene with hexene-1 comonomer (LLDPE-H1) and butene-1 comonomer (LLDPE-B1), in the presence of styrene monomer (St) and dicumyl peroxide initiator (DCP) has been studied. The combined influences of MAH, St and DCP on the grafting efficiency via a melt reactive mixing process have been investigated using r...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 16  شماره 2

صفحات  91- 94

تاریخ انتشار 1997-12-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023