Geometry Definition and Contact Analysis of Spherical Involute Straight Bevel Gears

نویسنده

چکیده مقاله:

A practical application of the spherical involute surface to the forged straight bevel gears is provided and demonstrated in this work. Conjugate (pure involute) theoretical surfaces are developed from the input design parameters. The surfaces are modified to suit the actual application (automotive differential). The unloaded (or low load) tooth contact analysis of modified surfaces is performed to obtain the prediction of the contact pattern. In order to verify the procedure and predictions, actual straight bevel gears are forged by using provided surfaces, and their contact pattern is compared to the predictions. Influence of the misalignments on the gear performance is investigated in order to provide more robust design.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

geometry definition and contact analysis of spherical involute straight bevel gears

a practical application of the spherical involute surface to the forged straight bevel gears is provided and demonstrated in this work. conjugate (pure involute) theoretical surfaces are developed from the input design parameters. the surfaces are modified to suit the actual application (automotive differential). the unloaded (or low load) tooth contact analysis of modified surfaces is performe...

متن کامل

The Computational Fundamentals of Spatial Cycloidal Gearing

The tooth flanks of bevel gears with involute teeth are still cut using approximations such as Tredgold’s and octoid curves, while the geometry of the exact spherical involute is well known. The modeling of the tooth flanks of gears with skew axes, however, still represents a challenge to geometers. Hence, there is a need to develop algorithms for the geometric modeling of these gears. As a mat...

متن کامل

Spatial involute gearing - a new type of skew gears

This is a geometric approach to spatial involute gearing which has recently been developed by Jack Phillips [4]. Due to Phillips' fundamental theorems helical involute gears for parallel axes (Fig. 2) serve also as tooth flanks for a uniform transmission between skew axes, and the transmission ratio is even independent of the relative position of the axes.

متن کامل

Optimal Selection of Addendum Modification Coefficients of Involute Cylindrical Gears

Based on the principles of equalized sliding coefficients and equalized teeth bending strength, the optimization mathematical model for calculating and allocating the addendum modification coefficients of involute cylindrical gear is firstly established. Then the measures to calculate the tooth parameters in real-time during the optimization steps are achieved. Finally, the optimization program...

متن کامل

Bending strength simulation of asymmetric involute tooth gears

In order to enhance the load capacity of gears, researchers take notice in the asymmetric tooth gears. Asymmetric gear which has higher pressure angle of back tooth aiming to improve banding strength has been analyzed (Deng, et al., 2003). Brown et al. (Brown, et al., 2010) investigate the asymmetric tooth from both point of view of bending and scuffing. Kruger et al. (Kruger et al., 2013) anal...

متن کامل

The Mathematical Model of Spiral Bevel Gears - A Review

The spiral bevel gear (SBG), with its high contact ratio, high strength and smooth driving, is widely used to transmit dynamic power in various mechanical products, including vehicles, mining machinery, aerospace engineering, and helicopters [1] to [4]. Typical SBGs are shown in Figs. 1a and b. The SBG has been a subject of research for almost a century, and there is a significant amount of lit...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 23  شماره 2

صفحات  101- 111

تاریخ انتشار 2012-06

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

کلمات کلیدی

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023