Generation Process and Performance Evaluation of Engineered Microsphere Agarose Adsorbent for Application in Fluidized-bed Systems
نویسندگان
چکیده مقاله:
In this research, the generation process of engineered microsphere agarose adsorbent has been explained that has surfaces with different active sites to adsorb protein nanoparticles into the fluidized-bed system. Also, excellent selectivity of protein nanoparticles, high adsorption capacity, and fast equilibrium rate through the eco-friendly polymeric adsorbents were vital aims in here. Hence, agarose as a cheap, and abundant natural polymer, with a ferromagnetic condenser, and dye-ligand adsorbents, were employed to generate the engineered microsphere agarose adsorbent. Then, the performance of produced adsorbents was evaluated in the batch and fluidized-bed system. Scanning electron microscopy, atomic force microscopy, and optical microscope were used. Results showed the shape of adsorbents is spherical, with the size distribution range of 50-250 µm, the porosity of around 90%, and the wet density of 2.6 g/mL. Then, to compare the performance of the engineered adsorbents in a fluidized-bed system, the dye ligand was immobilized on the Streamline™. The obtained results were compared at the same conditions. In batch adsorption tests, the results of lactoferrin nanoparticle adsorption were shown higher dynamic binding capacity with engineered microsphere agarose adsorbents. Also, the results demonstrated that more than 75% of the adsorption process occurred in the first half-hour, which is a very suitable time for a fluidized-bed system. Also, adsorption equilibrium data were evaluated with isothermal adsorption models, and Langmuir’s model suits the data, and the maximum of adsorption was close to 45.3 mg/mL adsorbent. The fluidized-bed adsorption tests showed that engineered adsorbents gained a sound breakthrough performance at high flow velocity and upper dynamic binding capacity compared to commercial adsorbents. The dynamic binding capacity at 10% breakthrough achieved 71% of the flooded adsorption process at the major fluid velocity of 348 cm/h, so the engineered adsorbent has been proved the good potential for use in high flow rate fluidized-bed systems.
منابع مشابه
coordination of protective schemes in distribution and subtransmission systems including distributed generation
نصب منابع پراکنده در سیستم های توزیع و فوق توزیع علاوه بر مزیت های فراوان، مشکلاتی را هم به همراه دارد. یکی از این مشکلات تأثیر این منابع روی اندازه جریان های اتصال کوتاه است. به طور معمول از حفاظت های مبتنی بر اصل جریان زیاد در سیستم های توزیع و فوق توزیع استفاده می شود. از مهمترین طرح های حفاظتی استفاده شده در فیدرهای توزیع، حفاظت فیوز- ریکلوزر است. همچنین از طرح های حفاظتی جریان زیاد جهتی در...
Advanced Process Control for Fluidized Bed Agglomeration
Fluidized bed agglomeration is an advanced technology to produce spherical coarse-grained material of uniform size ready for sale without any need for post-treatment. This study discusses the possibilities and appropriateness of an intelligent control method such as a fuzzy logic controller in simulating and controlling fluidized bed agglomeration performance. Modeling and simulation was perfor...
متن کاملapplication and construction of carbon paste modified electrodes developed for determination of metal ions in some real samples
ساخت الکترودهاِی اصلاح شده ِیکِی از چالشهاِی همِیشگِی در دانش شیمِی بوِیژه شیمِی تجزیه مِی باشد ،که با در نظر گرفتن سادگِی ساخت، کاربردی بودن و ارزان بودن روش مِی توان به باارزش بودن چنِین سنسورهاِی پِی برد.آنچه که در ادامه آورده شده به ساخت و کاربرد الکترودهاِی اصلاح شده با استفاده از نانو ذرات در اندازه گِیرِی ولتامترِی آهن وکادمِیم اشاره دارد. کار اول اختصاص دارد به ساخت الکترود خمِیر کربن اصلاح شده با لِیگاند داِ...
15 صفحه اولApplication of three Types of Dryers Namely Tunnel, Fluidized Bed, and Fluidized Bed with Microwave for Drying of Celery, Corn, and Sour Cherry: Experiments and Modeling (TECHNICAL NOTE)
In this paper, water content from celery, corn, and sour cherry were removed through tunnel, fluidized bed, and fluidized bed with microwave dryers. One day before performing the experiments, the fruits were put into a refrigerator and were ground into slices with average dimensions of 5×8×8 mm. For each experiment, 40 g of the samples were inserted in dryers. Moisture content in the samples wa...
متن کاملDecentralized Advanced Model Predictive Controller of Fluidized-Bed for Polymerization Process
The control of fluidized-bed operations processes is still one of the major areas of research due to the complexity of the process and the inherent nonlinearity and varying dynamics involved in its operation. There are varieties of problems in chemical engineering that can be formulated as NonLinear Programming (NLPs). The quality of the developed solution significantly affects the performa...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 33 شماره 8
صفحات 1450- 1458
تاریخ انتشار 2020-08-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023