Fracture Dynamic Propagation Model of High-Energy Gas Fracturing for Casing Perforated Well

نویسندگان

  • Bing Zhao Sinopec Northwest Oilfield Branch Petroleum Engineering Technology Research Institute, China
  • De Li College of Petroleum Engineering, China University of Petroleum, Huangdao Shandong,China
  • Nan Li Sinopec Northwest Oilfield Branch Petroleum Engineering Technology Research Institute, China
  • Qian Ding College of Petroleum Engineering, China University of Petroleum, Huangdao Shandong,China
  • Zhi Liu Sinopec Northwest Oilfield Branch Petroleum Engineering Technology Research Institute, China
چکیده مقاله:

The onshore oil and natural gas industries of China have started a large-scale development when crude oil reserves have been difficult to recover. The stratum fracture modification is an indispensable measure to efficiently develop oil and gas fields. Hydraulic fracturing is the most important reservoir stimulation technique, but it is still faced with various problems such as the failure to fracture the target reservoir, long fracturing duration, and short efficient length of the fracture. High Energy Gas Fracturing (HEGF) can easily break down the high-fracture-pressure oil reservoir and generate multiple fractures free of in-situ stress. Moreover, HEGF entails no large-scale devices, and this method is strongly adaptable to the environment without causing environmental pollution. After combining the two technologies (HEGF and the other), then they can complement each other with their strengths. That is, both of them decrease the fracture initiation pressure of (or caused by) hydraulic fracturing on the one hand, and to extend, gather, and support multiple radial fractures of gas fracturing on the other hand. Thus, a fracture zone with a large radius is finally formed, and the percolating resistance of the fluid is significantly decreased.Moreover, in this study, a dynamic model related to the drainage flow of the perforated holes in a gas well, fluid pressure distribution in the fracture, fluid seepage on the fracture wall, fracture initiation criterion, and fracture propagation velocity during the HEGF process has been presented. Consequently, a gas/liquid/solid coupling fracture dynamic propagation model during the HEGF process can be built to provide a theoretical basis for the accurate simulation of the fracture form changes during this process.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The influence on casing stress for shale gas fracturing wells considering thermo-pressure coupling effect

The casing deformation problems are presented over 36 wells (among 112 horizontal wells by 2016) during fracturing processes in Weiyuan-Changning shale gas play in China.1 Subsequent tools could be blocked in the wellbore.2–4 The segments with serious deformation had to be abandoned before completing fracturing operations.5 The casing deformation issues make a great influence on production of s...

متن کامل

diagnostic and developmental potentials of dynamic assessment for writing skill

این پایان نامه بدنبال بررسی کاربرد ارزیابی مستمر در یک محیط یادگیری زبان دوم از طریق طرح چهار سوال تحقیق زیر بود: (1) درک توانایی های فراگیران زمانیکه که از طریق برآورد عملکرد مستقل آنها امکان پذیر نباشد اما در طول جلسات ارزیابی مستمر مشخص شوند; (2) امکان تقویت توانایی های فراگیران از طریق ارزیابی مستمر; (3) سودمندی ارزیابی مستمر در هدایت آموزش فردی به سمتی که به منطقه ی تقریبی رشد افراد حساس ا...

15 صفحه اول

Hydraulic Fracturing Simulation for Fracture Networks

The term ‘Unconventional Reservoirs’ is used in the oil and gas industry for hydrocarbon reservoirs that have very low permeability in the magnitude of microdarcy (μd) and therefore rely on artificially introducing pathways for fluids and gases, commonly by using hydraulic fracturing techniques, to enable economic production. This approach of using fracturing stimulation campaigns is also incre...

متن کامل

The Calculation Model of Initiation Pressure During Hydraulic Fracturing Process of Perforated Coal Seams

There are lots of cleats, fractures and many other structure weak planes in coal seams, which make the bullet holes and cleats intersecting. During the hydraulic fracturing process in coal seams, fractures will initiate at coal rock body of borehole wall, and cleats or fractures are different from conventional reservoirs. Thus a new model for initiation pressure calculation during coal seams fr...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 9  شماره 1

صفحات  44- 55

تاریخ انتشار 2019-02-16

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023