Fracture Analysis of a FGM Strip Containing Multiple Interface Cracks Sandwiched between Two Homogeneous Layers

نویسندگان

  • hossein lak Mechatronics Faculty, Department of Mechanical Engineering, Karaj Branch, Islamic Azad University, Alborz, Iran
چکیده مقاله:

A FGM layer sandwiched between two isotropic layers weakened by several interface cracks under antiplane loading is studied. This paper examines the modelling of cracks by distribution of strain nuclei along crack lines. In this investigation, the Volterra-type screw dislocation employed between FGM and an elastic layer. To solve the dislocation problem, the complex Fourier transform is applied. One merit of this technique is the possibility to determination of the stress intensity factors for multiple cracks. The system of equations is derived by considering the distribution of line dislocation on the crack. These equations are of Cauchy singular type at the location of dislocation, which can be solved numerically to obtain the dislocation density on the faces of the cracks. Several examples are solved and the stress intensity factors are obtained. The effect of the properties and cracks geometries on the mode III stress intensity factor are studied and the validity of analysis is checked.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fracture Analysis of a FGM Strip Containing Multiple Interface Cracks Sandwiched Between Two Homogeneous Layers

A FGM layer sandwiched between two isotropic layers weakened by several interface cracks under antiplane loading is studied. This paper examines the modelling of cracks by distribution of strain nuclei along crack lines. In this investigation, the Volterra-type screw dislocation employed between FGM and an elastic layer. To solve the dislocation problem, the complex Fourier transform is applied...

متن کامل

Multiple moving cracks in an orthotropic strip sandwiched between two piezoelectric layers

In this paper, the solution of a moving Volterra-type screw dislocation in an orthotropic layer, bonded between two piezoelectric layers is obtained using complex Fourier transform. The dislocation solution is then employed as strain nuclei to derive singular integral equations for a medium weakened by multiple moving cracks. These equations, which are classified as, Cauchy singular equations, ...

متن کامل

Multiple Moving Cracks in an Orthotropic Strip Sandwiched between Two Piezoelectric Layers

Dynamic fracture mechanics of layered materials has been gaining lots of attentions among the researchers where the layered materials are extensively used in various products and devices to improve structural performance such as strength and durability. The influence of the crack moving speed on the the stress intensity factors was a popular subject in classical elastodynamics. Among the models...

متن کامل

multiple moving cracks in an orthotropic strip sandwiched between two piezoelectric layers

in this paper, the solution of a moving volterra-type screw dislocation in an orthotropic layer, bonded between two piezoelectric layers is obtained using complex fourier transform. the dislocation solution is then employed as strain nuclei to derive singular integral equations for a medium weakened by multiple moving cracks. these equations, which are classified as, cauchy singular equations, ...

متن کامل

Mixed Mode Fracture Analysis of Multiple Interface Cracks

This paper contains a theoretical formulation of multiple interface cracks in two bonded dissimilar half planes subjected to in-plane traction. The distributed dislocation technique is used to construct integral equations for a dissimilar mediums weakened by several interface cracks. These equations are of Cauchy singular type at the location of dislocation, which are solved numerically to obta...

متن کامل

Multiple Moving Cracks in a Nonhomogeneous Orthotropic Strip

The problem of several finite moving cracks in a functionally graded material is solved by dislocation technique under the condition of anti-plane deformation. By using the Fourier transform the stress fields are obtained for a functionally graded strip containing a screw dislocation. The stress components reveal the familiar Cauchy singularity at the location of dislocation. The solution is em...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 16  شماره 2

صفحات  77- 91

تاریخ انتشار 2015-09-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023