Fixed Bed Column Modeling of Cd(II) Adsorption on Bone Char Using Backward Bayesian Multiple Linear Regression

نویسندگان

  • M. J. Amiri Department of Water Engineering, College of Agriculture, Fasa University, P.O.Box 74616-86131, Fasa, Iran
  • M. Khozaei Department of Water Engineering, College of Agriculture, Shiraz University, P.O. Box 71365, Shiraz, Iran
  • M. R. Mahmoudi Department of Statistics, Faculty of Science, Fasa University, P.O. Box 74616-86131, Fasa, Iran
چکیده مقاله:

In this work, the backward Bayesian multiple linear regression (BBMLR) as a new approach is presented to predict the adsorption efficiency (AE) of Cd(II) ions by ostrich bone char (OBC) in the fixed bed adsorption with four operational variables consisting of pH (2-9), inlet Cd(II) concentration (Co= 25-100 mg/L), bed depth (h= 3-9 cm) and feed flow rate (Q= 0.5-30 mL/min). The performance of the BBMLR was evaluated using the coefficient of determination (R2), normalized root means square error (NRMSE) and mean residual error (MRE). The AE of Cd(II) ions by OBC increased from 42.3% to 99.9% when pH was increased from 2 to 9 with h of 6 cm and Q of 1.5 mL min-1. It was found that the AE dramatically increased from 70.5% to 99.9% with decreasing Q from 30 to 0.5 mL min-1 at pH of 7 and h of 6 cm. At pH= 7 and Q= 1.5 mL min-1, the AE increased from 71.9% to 100% when h increased from 3 to 9 cm. The BBMLR model presented excellent performance (NRMSE=6.69%) for predicting Cd(II) removal in a continuous adsorption system, although it gave a slight underestimation (approximately 3.52%). The BBMLR is more sensitive to the pH, followed by h and Q, while the Co has no significant effect on it. This research displays that OBC has great potential as an eco-friendly low-cost adsorbent in removing Cd(II) ions from the contaminated waters.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

kinetic modeling of heavy metals adsorption on fixed bed column

the adsorption of lead (11) and copper (11) in a fixed bed column using activated carbonprepared from nipa palm nut was investigated. thomas model and yoon and nelson kinetic models were used to analyze the column performance. the rate constant for thomas model increased with increase in flow rate and initial ion concentration but remained constant at varying bed height. adsorption capacity for...

متن کامل

Modeling and Simulation of Fixed Bed Adsorption Column: Effect of Operating Variables

The kinetics in a fixed-bed adsorption system is explained using a mathematical model that takes into account of external and internal mass-transfer resistances with a nonideal plug flow behavior. The variation of fluid velocity along the column is an important aspect, which has not been accounted so far in these models. In the present study, a mathematical model is proposed for explaining the ...

متن کامل

Modeling and Simulation of Fixed bed Adsorption column: Effect of Velocity Variation

The kinetic behavior of a fixed-bed adsorber can be explained and the characteristic breakthrough curve of the adsorption phenomena can be obtained through mathematical models. In the earlier models, the kinetics is explained using a mathematical model that takes into account of external and internal masstransfer resistances with a nonideal plug flow behavior. The variation of fluid velocity al...

متن کامل

Experimental, Kinetics and Isotherm Modeling of Carbon Dioxide Adsorption with 13X Zeolite in a fixed bed column

In this work, zeolite 13X with porosity structure has been used as an adsorbent for adsorption of CO2 flue gas. The effect of operating conditions including pressure and time on adsorption capacity were investigated. The experiments conditions are constant temperature, the range of pressure 1 - 9 bar and the registration of adsorption capacity with passing of time. Experimental data were adjust...

متن کامل

Mathematical Modeling of Fixed Bed Adsorption: Influence of Main Parameters on Breakthrough Curve

Dynamic modeling and simulation of fixed bed adsorption process was carried out by explaining the behavior of breakthrough curve parameter. Adsorption of sulfur compound, present in road fuel, has posed a great challenge. A model of fixed bed adsorption of benzothiophene from fuel was formulated with non-ideal plug flow behavior and considered velocity variation along a column. The model was so...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 6  شماره 2

صفحات  451- 461

تاریخ انتشار 2020-04-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023