Experimental Investigation and Optimizing Geometrical Characteristics and Surface Quality in Drilling of AISI H13 Steel

نویسندگان

  • Farshid Jafarian Faculty of Engineering, Mahallat Institute of Higher Education, Mahallat, Iran
  • Hojjat Samarikhalaj Department of Mechanical Engineering, Amirkabir University of Technology, 424 Hafez Ave., 15914 Tehran, Iran
چکیده مقاله:

The aim of this paper is to investigate and optimize surface quality and geometrical characteristics in drilling process of AISI H13 steel, because they are critical items for precision manufacturing. After conducting the experiments, two regression models are developed to extensively evaluate the effect of drilling parameters on process outputs. After that, evolutionary multi-objective optimization algorithm is employed to find the optimal drilling conditions. Non-dominated Sorting Genetic Algorithm (NSGA-ІІ) is developed and regression functions are taken into account as objective functions of algorithm to simultaneously optimize the surface roughness and deviation of circularity. The optimization results are successfully in agreement with experimental findings and finally the set of optimal drilling conditions is reported that can be selected by process engineer according to the priority and application. It is shown that, an increase in Cutting speed and liquid coolant intensity decreases the surface quality, while higher depth of cut, tool diameter and reed rate improve it. It is also found that tool diameter and depth of cut are the most effective input parameters on deviation of circularity. Finally, it can be concluded that, the implemented approach in this research provides an efficient method for other manufacturing processes to increase the performance and reduction of production costs.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Surface integrity predictions and optimisation of machining conditions in the turning of AISI H13 tool steel

Surface integrity (SI) plays a very important role in functional performance. It is dependent on a large number of machining parameters. The major concern of industry is to know which combination of machining parameters provides the best SI of machined components. Traditionally, surface roughness is considered to be the principal parameter to assess the SI of a machined part. However, residual ...

متن کامل

effect of bataine and sulphate supplement on wool and milk characteristics and lambs performance in naine ewes

تعداد 20 رأس میش نژاد نائینی 6+-24 ماهه، با میانگین وزن 2/3-+40 کیلوگرم، همراه با 20 رأس بره های آنها در قالب طرح کاملا تصادفی اثر بتائین و مکمل سولفات بر خصوصیات شیر و پشم و عملکرد بره ها بررسی شد. میش ها بطور تصادفی در چهار تیمار قرار گرفتند. تیمارها عبارت بودند از: 1-گروه شاهد 2-بتائین (05/0 درصد ماده خشک) 3-سولفات (24/0 سولفور درصد ماده خشک 4-بتائین هرماه با سولفات. جیره غذائی طبق nrc با مح...

15 صفحه اول

INVESTIGATION NITRIDE LAYERS AND PROPERTIES SURFACES ON PULSED PLASMA NITRIDED HOT WORKING STEEL AISI H13

Nitriding is a surface treatment technique used to introduce nitrogen into metallic materials to improve their surface hardness, mechanical properties, wear resistance and corrosion resistance. In this research, the effects of plasma nitriding parameters including frequency and duty cycle were investigated on samples with different grooves dimensions. Steel blocks prepared from DIN1.2344 hot wo...

متن کامل

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 6  شماره 2

صفحات  332- 343

تاریخ انتشار 2020-04-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023