Evaluation of Soldered Joints of Two Base Metal Ceramic Alloys: Supercast and Minalux

نویسندگان

Ehsan Ghasemi Assistant Professor, Dental Materials Research Center and Department of Prosthodontics, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran

Farshad bajoghli Associate Professor, Dental Implant Research Center and Department of Prosthodontics, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran

Saeed Sahafi Dentist

چکیده مقاله:

Background: Different soldering techniques have a variety of applications in dentistry. One of the most important uses of soldering is to join multiple-unit fixed partial dentures together. In this Study, two base metal alloys (Supercast and Minalux) were soldered and their tensile, compressive and flexural strengths were measured and compared to each other. Materials and methods: In this in-vitro study, an aluminum pattern was made by a milling machine according to ASTM (American Society for Testing Material). Eighteen acrylic resin Patterns were duplicated by flasking using putty indices according to the original aluminum pattern. Acrylic resin patterns were divided into two groups of nine and each group was cast with two different alloys named Supercast and Minalux. All eighteen metal rods were separated by 0.008-inch disc and soldered with Vera-solder by means of gas-oxygen torch. Three patterns of each alloy were selected for each of the compression, tensile and flexural tests. Tensile strength was measured by Instron a universal machine and flexural and compression strengths were measured by Dartec machine. Statistical analysis was done by Mann - Whitney test. Results: The mean tensile, flexural and compressive strengths for supercast alloy was 347.6, 44.01 and 1014.8MPa respectively and the mean for tensile, flexural and compressive strengths for Minalux alloy was 350.03, 51.70 and 938.17 MPa respectively. Statistical analysis showed no significant differences between the two alloys in all the three mentioned tests. (p>0.05) Conclusion: Tensile, flexural and compressive strengths of the two soldered alloys, Minalux and supercast, showed no significant differences. Minalux is an alloy manufactured in Iran with the advantage of not including Beryllium, a cariogenic element, as one of the ingredients of the alloy; therefore, it is suggested that Minalux be used instead of supercast in soldering procedures in fixed prosthodontics.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

بررسی مقایسه‌ای استحکام کششی باند فلز- پرسلن در دو آلیاژ بیس‌متال

Statement of Problem: One of the greatest problems in metal –ceramic restorations is debonding of porcelain from dental alloys. Production of dental alloys by Iranian companies necessitates the evaluation of physical and handling properties of these products. Purpose: In this study the bond strength between porcelain and two types of base metal alloys, Supercast (with beryllium) and Minalux (wi...

متن کامل

In vitro element release and biological aspects of base–metal alloys for metal-ceramic applications

Objective: The aims of this study were to investigate the release of element from, and the biological response in vitro to, cobalt-chromium alloys and other base-metal alloys used for the fabrication of metal-ceramic restorations. Material and methods: Eighteen different alloys were investigated. Nine cobalt-chromium alloys, three nickel-chromium alloys, two cobalt-chromium-iron alloys, one pal...

متن کامل

evaluation of different finish line designs in base metal alloys

this investigation was performed according to the widespread application of base metal alloys and few articles published about the marginal integrity of restorations fabricated by these metals.three standard dies of a maxillary first premolar were prepared with a flat shoulder finish line in buccal aspect and chamfer in palatal. one of them left with no change. on the buccal aspect of the secon...

متن کامل

مقایسه Marginal gap دو آلیاژ بیس‎متال (مینالوکس و وراباند2) در مراحل پخت پرسلن

Statement of Problem: Nowadays economical issues on high gold alloys have changed the practice of metal-ceramic restorations toward base-metal alloys. Minalux is one of the base-metal alloys produced in Iran. Marginal fitness is of high importance to be evaluated in dental alloys.Purpose: The aim of the present study was to compare the marginal adaptation of two base-metal alloys, Minalux (Mava...

متن کامل