Enhancement of the Cooling System Performance of the Proton-exchange Membrane Fuel Cell By Baffle-restricted Coolant Flow Channels

نویسندگان

چکیده مقاله:

The performance of proton-exchange membrane fuel cell cooling system using coolant flow channels enhanced with baffles was numerically investigated. To do this, the maximum temperature of the cooling plate, temperature uniformity and also pressure drop along the flow channels were compared for different cases associated with number of baffles and their dimensions inside the channels. The governing equations by the finite-volume approach in three dimensions were solved. Numerical results indicate that the baffle-restricted cooling flow channels, generally improved the performance of the fuel cell in such a way that a reduced maximum temperature of the cell and a better temperature uniformity in the cooling plates were determined. As the pressure drop increases by incorporating the baffles inside the coolant flow channels, one needs to compromise between the improvement of cooling system performance and the total pressure drop.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The simulation of novel annular shape on the Performance in Proton Exchange Membrane Fuel Cell

In this article, one-phase and three dimensional computational fluid dynamics analysis was utilized to investigate the effect of annular field pattern of proton exchange membrane fuel cells (PEMFC) with different geometry on the performances and species distribution. This computational fluid dynamics code is used for solving the equation in single domain namely the flow field, the mass conserva...

متن کامل

The effect of inclined radial flow in proton exchange membrane fuel cells performance

Computational fluid dynamics analysis was employed to investigate the radial flow field patterns of proton exchange membrane fuel cells (PEMFC) with different channel geometries at high operating current densities. 3D, non-isothermal was used with single straight channel geometry. Our study showed that new generation of fuel cells with circle stack with the same active area and inlet area gave ...

متن کامل

Numerical study on the performance prediction of a proton exchange membrane (PEM) fuel cell

An electrochemical analysis on a single channel PEM fuel cell was carried out by Computational Fuel Cell Dynamics (CFCD). The objective was to assess the latest developments regarding the effects of change in the current collector materials, porosity of electrodes and gas diffusion layer on the fuel cell power density. Graphite, as the most applicable current collector material, was applied fol...

متن کامل

Dynamic investigation of hydrocarbon proton exchange membrane Fuel Cell

Sulfonated polyether ether ketone (SPEEK) is categorized in a nonfluorinated aromatic hydrocarbon proton exchange membrane (PEM) group and considered as a suitable substitute for common per-fluorinated membranes, such as Nafion, due to wider operating temperature, less feed gas crossover, and lower cost. Since modeling results in a better understanding of a phenomenon, in this study a dynamic o...

متن کامل

Integration of a Vanadium Redox Flow Battery with a Proton Exchange Membrane Fuel Cell as an Energy Storage System

The proton exchange membrane (PEM) fuel cell is a green energy producer which converts chemical energy to electricity in high yield. Alternatively, the vanadium redox flow battery (VRB) is one of the best rechargeable batteries because of its capability to average loads and output power sources. These two systems are modeled by Nernst equation and electrochemical rules. An effective energy gene...

متن کامل

the effect of inclined radial flow in proton exchange membrane fuel cells performance

computational fluid dynamics analysis was employed to investigate the radial flow field patterns of proton exchange membrane fuel cells (pemfc) with different channel geometries at high operating current densities. 3d, non-isothermal was used with single straight channel geometry. our study showed that new generation of fuel cells with circle stack with the same active area and inlet area gave ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 31  شماره 5

صفحات  812- 819

تاریخ انتشار 2018-05-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023