Electron beam irradiation method to change polypropylene application: Rheology and thermomechanical properties

نویسندگان

  • Fatemeh Hassan Department of Chemical and Polymer Engineering, Faculty of Engineering, Yazd University, 891581–8411, Iran.
  • Mehdi Entezam Department of Chemical and Polymer Engineering, Faculty of Engineering, Yazd University, 891581–8411, Iran.
چکیده مقاله:

Irradiation of polymers is one of the most effective and economical methods for modifying their properties and for changing their applications. In this study, an extrusion grade polypropylene (PP) was treated by electron beam irradiation to produce a PP suitable for injection molding. Irradiation was carried out at different doses (0-80 kGy) under atmosphere air and at ambient temperature. Melt flow index (MFI) measurements showed PP samples irradiated in the range of 10 to 40 kGy are suitable to use in injection molding. Electron beam irradiation decreased the viscosity and the shear thinning rheological behavior of PP. The differential scanning calorimetry (DSC) analysis revealed that electron beam irradiation increased the crystallinity percentage and temperature of PP, but decreased the melting temperature. Among all treated samples, the PP20, irradiated at the dose of 20 kGy, showed the highest impact resistance. It had higher Young’s modulus and tensile strength, but lower elongation-at-break in comparison with untreated PP.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Electron Beam Irradiation Applications

The irradiation of materials with electron beams or X rays is used extensively to enhance or modify their physical, chemical or biological properties. These electron beam “irradiators” cover a very wide range of accelerators technology, beam current and energies to produce a wide variety of products, mostly with polymers. They also are used for curing ink, coatings, and adhesives as well as for...

متن کامل

Radioprotective and antioxidant potential of Tanacetum parthenium extract and synthetic parthenolide in Swiss albino mice exposed to electron beam irradiation

Background: The herb feverfew (Tanacetum parthenium L., Asteraceae) has an ancient reputation as an effective anti-inflammatory, analgesic, antipyretic, and anti-asthmatic agent. Parthenolide a gemacranolide-type sesquiterpene lactone is the major constituent of European feverfew. Materials and Methods: The present study was intended to evaluate the in vivo antioxidant potential and radioprotec...

متن کامل

Intraoperatic electron beam irradiation in pancreatic cancer.

Intraoperative electron beam radiation therapy (IOERT) is a technique in which a single high fraction radiation treatment is administered at the time of surgery. Using IOERT, the total radiation dose delivered to a tumor can be increased since sensitive normal tissues are removed from the radiation field during the surgical procedure. Furthermore, while the biologic effectiveness of this single...

متن کامل

Electron beam irradiation of dental composites.

OBJECTIVES Electron beam irradiation can be used to influence the mechanical properties of polymers. It was the aim of this study to investigate whether dental composites can benefit from irradiation in order to achieve increased fracture toughness, work of fracture, hardness or less wear. METHODS Two hundred rectangular specimens of five veneering composites were electron beam irradiated wit...

متن کامل

Treatment of Synthetic Textile Wastewater by Combination of Coagulation/Flocculation Process and Electron Beam Irradiation

Introduction: Textile wastewaters from dyeing and finishing processes are heavily polluted with dyes, textile auxiliaries and chemicals and have a broad range of pH, high COD concentration and suspended particles. In this study, the efficiency of color and turbidity removal from synthetic textile wastewater samples were investigated by combined process of coagulation/ flocculation and electron ...

متن کامل

Mechanical properties of polypropylene-fiber reinforced concrete after gamma irradiation

Fiber reinforced concretes (FRCs) exhibit property improvement caused by the fibers. By using gamma radiation we have further improved mechanical properties of hydraulic concretes elaborated with Portland cement, water, silica sand, marble and polypropylene (PP) fibers. Compression strength, compression modulus, impact strength and dynamic elastic modulus were determined. Impact fatigue testing...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 6  شماره 1

صفحات  53- 61

تاریخ انتشار 2019-01-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023