ELECTROCHEMICAL NOISE ANALYSIS OF 70-30 BRASS DURING STRESS CORROSION CRACKING TEST IN MATTSON S SOLUTION

Acoustic Emission during Stress Corrosion Cracking Test

AE monitoring from various types of stress corrosion cracking (SCC) has been conducted for the past 15 years in our laboratory. This paper discusses AE results of active-path dissolution-type SCC of austenitic stainless steel in chloride solution and fused salt, fluoride and polythionic acid solutions, brass in ammonia (Mattosson's solution), and carbon steels in nitrite solution. Transgranular...

Electrochemical Noise Analysis of Anaerobic (Bacterial) Corrosion of Steel

Corrosion of structural steel in an SRB containing environment for as long as 9 months, is studied using the Electrochemical Noise Analysis technique. The results show that the activity of the system, which was very low initially, started to increase after 6 months exposure to the environment. The power spectral density curves of the Electrochemical Potential Noise of the system, using the maxi...

Stress Corrosion Cracking

Corrosion Product Film-Induced Stress Facilitates Stress Corrosion Cracking

Finite element analyses were conducted to clarify the role of corrosion product films (CPFs) in stress corrosion cracking (SCC). Flat and U-shaped edge-notched specimens were investigated in terms of the CPF-induced stress in the metallic substrate and the stress in the CPF. For a U-shaped edge-notched specimen, the stress field in front of the notch tip is affected by the Young's modulus of th...

An Investigation on Corrosion and Stress Corrosion Cracking initiation of a Ferritic Stainless Steel in a Tertiary Amine Solution

The present study focused on stress corrosion cracking (SCC) and corrosion behavior of ferritic stainless steel (grade 430) in activated methyl diethanolamine (aMDEA) solution, which is classified as a tertiary amine. In this regard, cyclic polarization and U-bend tests were performed in CO2 loaded aMDEA with different concentrations at 25 and 70 °C to observe corrosion behavior and ...

Deformation Behavior of a 70/30 Alpha Brass in Plane Stress/plane Strain

Generally a simple power law ~ = K E" (where K and n are empirical constants called the strength coefficient and the work hardening coefficient respectively) is used to describe plastic stress-strain dependence of deformable metals (1,2). This equation was employed by Low (3) to describe the uniaxial tensile behavior of an annealed 70/30 brass. The slope of the corresponding double logarithmic ...