Dynamic Response of the Coupled Vehicle-Floating Slab Track System using Finite Element Method

نویسندگان

  • Mohammad Mehrali PhD. Candidate, School of Railway Engineering, Iran University of Science and Technology, Tehran, Iran
  • Morteza Esmaeili Associate Professor, School of Railway Engineering, Iran University of Science and Technology, Tehran, Iran
  • Saeed Mohammadzadeh Assistant Professor, School of Railway Engineering, Iran University of Science and Technology, Tehran, Iran
چکیده مقاله:

In present study, a mathematical model of the vehicle–floating slab track (FST) interaction is established to investigate the coupled behaviour of vehicle–track system. The FST is modelled as the double Euler -Bernoulli beam including the rail and slab. The railway vehicle is simplified as a multi-rigid-body model. The wheel–rail interface is treated using a nonlinear Hertzian contact model, coupling the mathematical equations of the vehicle–FST systems. The dynamic interaction of the entire system is numerically studied in time domain, employing Newmark’s integration method. The numerical model of the present research is validated using benchmark model reported in the literature. Finally using the developed numerical tool many sensitivity analyses were performed on various important parameters affecting on dynamic behaviour of slab track, such as slab thickness, axle load and the track bed stiffness and consequently the deflection and bending moment of rail and slab were assessed. Slab thickness has more effect on slab than rail dynamic behaviour.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

buckling of viscoelastic composite plates using the finite strip method

در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....

Influence of slab length on dynamic characteristics of subway train-steel spring floating slab track-tunnel coupled system

A subway train-steel spring floating slab track-tunnel coupling dynamic model, considering short and middle-long wavelength random track irregularities, and longitudinal connection between adjacent slabs of steel spring floating slab track, was developed. And the influence of slab length on dynamic characteristics of the system under different track conditions and train speeds are theoretically...

متن کامل

The Effects of Newmark Method Parameters on Errors in Dynamic Extended Finite Element Method Using Response Surface Method

The Newmark method is an effective method for numerical time integration in dynamic problems. The results of Newmark method are function of its parameters (β, γ and ∆t). In this paper, a stationary mode I dynamic crack problem is coded in extended finite element method )XFEM( framework in Matlab software and results are verified with analytical solution. This paper focuses on effects of main pa...

متن کامل

Vibration Characteristics and Effectiveness of Floating Slab Track System

Ground-borne vibration excited by metro traffic is becoming a more and more important problem for the rapidly developing transport system in urban areas and increasing public concern about environmental problems. In order to attenuate the vibration influence down to an acceptable level, floating slab track have been applied worldwide on metro line. An analytical dynamic model is employed in thi...

متن کامل

Study on the dynamic behavior of cylindrical steel liquid storage tanks using finite element method

Dynamic behavior of ground supported cylindrical storage tanks (CST) is of crucial importance because of its applications in industrial complexes. Seismic behavior of tanks is greatly affected by the height to diameter ratio, fluid height and fluid type. Five CSTs with different height to diameter ratios, three CSTs with the same height and diameters but various fluid heights and one CST with t...

متن کامل

vehicle interior structure borne noise calculation using finite element method

in this paper the interior noise level of a vehicle due to structural vibration, named structure borne noise, as a part of nvh analysis has been investigated. first structural analysis is performed and vibrational behavior of structure carried out due to power plant excitations. then interior acoustic cavity response for such excitation and resultant noise is determined. vibrational analysis is...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 4  شماره 1

صفحات  9- 26

تاریخ انتشار 2016-07-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023